Quick Question!

Have you ever purchased from PartSelect.com before?

11742477-1-S-Whirlpool-WP4387835-Overload and Relay Assembly
11742477-1-S-Whirlpool-WP4387835-Overload and Relay Assembly 11742477-2-S-Whirlpool-WP4387835-Overload and Relay Assembly 11742477-3-S-Whirlpool-WP4387835-Overload and Relay Assembly http://www.partselect.com/Schematics/Whirlpool/3WLUI4LQ.gif

Overload and Relay Assembly

PartSelect Number PS11742477

This kit comes with the compressor relay, overload and cover.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.
  • Fridge too warm.
  • Freezer section too warm.

Compare At

$63.55

You Save

$10.59

Your Price

$52.96
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 5 reviews What's this?
1-5 of 5
 

42 of 63 people found this instruction helpful

Parts Used:
  • Overload and Relay Assembly
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: John from Sachse, TX

Refrigerator not cooling.

Unplugged power cord from the wall outlet
I removed the back cover using a 1/4 nut driver. Removed the two wires, one went to the starter driver the other to the overload protection. Unplugged the part from the compressor.Plugged in new part and re-attached the two wires replaced cover and plugged in power back in to the wall outlet

Help other customers find the most helpful instructions.

Were these instructions helpful?   

22 of 38 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Stephen from Holt, MI

Smelled electrical burning / smoke

Removed cardboard back from refrig. Found source of smell/burn. Removed part. Ordered several replacement parts as the diagram was not clear as to which part would be needed. New parts arrived, matched with old. Cleaned carbon from contacts, installed new part. Cleaned dust from refrigeration coils, installed back. Returned unused parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 15 people found this instruction helpful

Parts Used:
  • Overload and Relay Assembly
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Victor from Colton, CA

Refridgerator do not get cold

Disconnect the power, removed the back panel, plastic cover and the relays. Replaced new parts, reattached the back panel and reconnected the power. The hardest part was to remove the plastic cover, it was locked on so tight,I had to use a putty knife to separate the cover from the compressor.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 10 people found this instruction helpful

Parts Used:
  • Overload and Relay Assembly
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver
Customer: frederick from martinsville, IN

Evaporator was clogged from no cleaning since new

I heard the compressor running, it was very hot. I looked on the internet for that model and found where the overload was an answer for compressor not running. First order was from a different source and I was sent the wrong overload for this frig. I ordered from Partselect.com and was provided with phone support and was sent correct overload. If I would have received the correct overload first, the time to repair would have been a 1/3 of the time. Thanks Partsselect.com.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 20 people found this instruction helpful

Parts Used:
  • Overload and Relay Assembly
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: walter from deland, FL

Inconsistant compressor starting

removed old unit and installed new one. very straight forward process. fridge has performed flawlessly since. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-5 of 5