Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11742325
This lower dishrack does not include the rollers, axles or corner splash guards. The color of the rack is no longer blue, but light ice gray.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
Soaked the axles in warm water and installed them, then placed the roller wheel on the axle. A no-brainer!
Help other customers find the most helpful instructions.
Were these instructions helpful?
With a very upset husband. The wheels were difficult to take off, although after he got the hang of it he stopped breaking them. I had ordered 6 wheels and axles, should have ordered 8, but the ones he didn't break we could use again. Now, the old cutlery basket from the old rack does not fit into the new rack. Today I ordered a new basket after being told the manufacturer must have changed the rack. Hoping the new basket fits the new rack.
I replaced the rack of my old Kitchen Aid dishwasher which is AT LEAST 40 years old... maybe 50 but runs fine. I just unscrewed the wheels from the old rusty rack and attached them to the new rack and popped it in place. Very easy!
The repair did not take long. Removed some of the parts from old racks which did not take too long to accomplish. Everything went together well. Very pleased with the new parts.
Tried to get the old axles and wheels off old dishwasher but couldn't so ordered new axles and wheels--not easy to put on--needed pliers--but the worst part is the wheels don't glide as well as the ones we couldn't get off the old rack so-particually when the bottom rack is loaded--it is very hard to push in the rack and pull it out. You practically have to lift it. Very disappointed as in the hopes of making an improvement (replacing old rack with broken pieces that held dishes) it is now worse!
We Pulled the rollers off the old rack and replaced them on the new one.
Ready to slide in, except for removing rollers & bumpers from old rack & placing on the new rack. Husband did this very easily, in less than 15 minutes.Dishwasher still in great working order after all these years, afraid to replace it with a lesser quality today.Rack arrived in 4 days! Wonderful!Only minor glitch...came white, instead of blue....but WHO CARES....fits beautifully. Very happy I decided to spend the money on the "old" dishwasher! (Would have done this sooner if I'd known parts were still available.)
The rack you sent me didn't have the plastic wheels on the bottom so I had to pry the old ones off and use them.
My parts really did not require tools to install , although the dishrack rollers may require some persuasion for someone with weak hands. The ease of ordering online and delivery was excellent. I will definately be using your service for all my appliance needs
I removed the old rack placed the new axles and wheels on the new rack and rolled it back into the dishwasher . It took about 5 minutes and was very easy.
replaced old rack with new on
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.