Quick Question!

Have you ever purchased from PartSelect.com before?

11742325-1-S-Whirlpool-WP4172117-Lower Dishrack Only
11742325-1-S-Whirlpool-WP4172117-Lower Dishrack Only 11742325-2-S-Whirlpool-WP4172117-Lower Dishrack Only 11742325-3-S-Whirlpool-WP4172117-Lower Dishrack Only http://www.partselect.com/Schematics/Whirlpool/24XK6HQZ.gif

Lower Dishrack Only

PartSelect Number PS11742325

This lower dishrack does not include the rollers, axles or corner splash guards. The color of the rack is no longer blue, but light ice gray.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$178.50

You Save

$29.75

Your Price

$148.75
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 11 reviews What's this?
1-11 of 11
 

75 of 139 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Carol from Darien, CT

Replaced the rollers on the new dishrack

Soaked the axles in warm water and installed them, then placed the roller wheel on the axle. A no-brainer!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

71 of 134 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Kathleen from Bergenfield, NJ

Bottom rack was rusty and prongs had broken off

With a very upset husband. The wheels were difficult to take off, although after he got the hang of it he stopped breaking them. I had ordered 6 wheels and axles, should have ordered 8, but the ones he didn't break we could use again. Now, the old cutlery basket from the old rack does not fit into the new rack. Today I ordered a new basket after being told the manufacturer must have changed the rack. Hoping the new basket fits the new rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16 of 18 people found this instruction helpful

Parts Used:
  • Lower Dishrack Only
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Kathleen from Burlington, VT

Old rusting dish rack needed to be replaced

I replaced the rack of my old Kitchen Aid dishwasher which is AT LEAST 40 years old... maybe 50 but runs fine. I just unscrewed the wheels from the old rusty rack and attached them to the new rack and popped it in place. Very easy!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

17 of 34 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: John from League City, TX

Replace top and bottom racks

The repair did not take long. Removed some of the parts from old racks which did not take too long to accomplish. Everything went together well. Very pleased with the new parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 5 people found this instruction helpful

Parts Used:
  • Lower Dishrack Only
Level of Difficulty: Difficult
Time to do repair: 1- 2 hours
Tools: Pliers
Customer: Mameve from Cambridge, MA

Replaced bottom dishrack on dishwasher and had ultimately to replace the wheels

Tried to get the old axles and wheels off old dishwasher but couldn't so ordered new axles and wheels--not easy to put on--needed pliers--but the worst part is the wheels don't glide as well as the ones we couldn't get off the old rack so-particually when the bottom rack is loaded--it is very hard to push in the rack and pull it out. You practically have to lift it. Very disappointed as in the hopes of making an improvement (replacing old rack with broken pieces that held dishes) it is now worse!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
  • Lower Dishrack Only
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Mary from Villaridge, MO

Rusty lower rack on dishwasher

We Pulled the rollers off the old rack and replaced them on the new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
  • Lower Dishrack Only
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Ardythe from Cherokee, IA

Dishwasher 22 years old....have been told no longer built in this country....badly rusted tynes on the bottom rack, leaving rust spots on dishes.

Ready to slide in, except for removing rollers & bumpers from old rack & placing on the new rack. Husband did this very easily, in less than 15 minutes.
Dishwasher still in great working order after all these years, afraid to replace it with a lesser quality today.
Rack arrived in 4 days! Wonderful!
Only minor glitch...came white, instead of blue....but WHO CARES....fits beautifully. Very happy I decided to spend the money on the "old" dishwasher! (Would have done this sooner if I'd known parts were still available.)

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
  • Lower Dishrack Only
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers
Customer: Michael from Little Falls, NJ

The racks were rusting and staining the dishes.

The rack you sent me didn't have the plastic wheels on the bottom so I had to pry the old ones off and use them.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
  • Lower Dishrack Only
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Dennis from Boynton Beach, FL

Diswasher parts worn out.

My parts really did not require tools to install , although the dishrack rollers may require some persuasion for someone with weak hands. The ease of ordering online and delivery was excellent. I will definately be using your service for all my appliance needs

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 4 people found this instruction helpful

Parts Used:
  • Lower Dishrack Only
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: lawrence from langhorne, PA

I replaced the bottom dishrack in my diswasher including axles and wheels

I removed the old rack placed the new axles and wheels on the new rack and rolled it back into the dishwasher . It took about 5 minutes and was very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Marlyn from Rockville, MD

Old lower dishrack had missing/broken pieces

replaced old rack with new on

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-11 of 11