Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11742322
This rubber tube carries water from the upper spray arm manifold to the receiver of a dishwasher. This thin walled tube can become brittle over time and crack. If it does, it will lead to poor cleaning quality of the dishes on the upper rack, and you will need to replace it.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
order new water tube and receiver and popped it on. No tools needed. Prefect fit. Washes like it did when it was new. Super fast shipping. 2 days.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Pulled off old tube and upper arm receiver.The new tube and the section it was to go on appeared to be too small. I heated new tube with hair blower and streched new tube so as to fit .
Took old one off and put new one on, about a 4 minute job.The part was about 1/3 of the cost if I had bought it local.
I removed clips on the end of the rack, removed the rack, and pulled old tube off. Used plain water as a lubricant to ease replacement of new tube on the dilated end. Very easy!
In my case the rubber tube was so worn that it came off very easily. I removed the tube, then with a little cooking oil, I lubricated the new hose and easily slipped it into place. Now my dishwasher works great! I ordered the part received it and repaired it for less than $20.00 and in less than 15 minutes.
Removed old tube, moistened both ends of new tube with hot water and slid over inlet and outlet holes. Repair done!
First the water tube arrived two days earlier than what I was expecting. I pulled the old tube off and slipped the new tube on by hand. The dishes in the top rack are now a lot cleaner than they have been for the past couple of months. In the future if I need repair parts this is where I will be coming to get them.
just popped the old hose off and put the new one on. the part was shipped very quickly and I received it within a week even during the holidays
Removed old tube.New tube was a little tight, so I heated it with a hair dryer and used dish washing detergent - Joy - as a lubricant. Then the tube slipped on easily.
It was simple. I simply replaced the old water tube with the new one you sent, and it works like new. Piece of cake.
I removed the old tube--I had taped over the hole. I didn't quite have the hand strength to fit over the ends and push the new tube into place. So, my husband did that at both ends without a problem. I'm relying on PartSelect for when I need parts for my 13 year-old appliances.
Removed the old tube with the aid of a knife to cut one end off the fitting. Then I lubed each end of the tube with dish washing soap and slipped them on. Done in 10 minutes. Easier to do if the top rack is removed for better access to the hose connections.
The Rubber water hose was missing and the upper wash/rinse blade wouldn't work. I thought no way am I going to be able to get parts for this 1993 dishwasher. Dishwasher was still in great shape, thought I would have to replace the dishwasher for a few hundred dollars. But it only cost me $31 for the 3 parts I needed. I was thrilled! I'm sure glad PartSelect had the missing parts. No tools were needed, I pushed the spray arm receiver onto the rubber water delivery tube. Then just slipped the rubber hose into place, done.
I placed the hose on one side after placing one end in boiling water. I placed the other end in the hot water and pushed it on.
I removed the broken water tube and put the new tube in its place.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.