11742254-1-M-Whirlpool-WP40053901-Drain Hose with Rubber Elbow
Part Location Diagram of WP40053901 Whirlpool Drain Hose with Rubber Elbow
See part 20 in the diagram
( Grid squares measure 1x1 inch )
11742254-1-S-Whirlpool-WP40053901-Drain Hose with Rubber Elbow 11742254-2-S-Whirlpool-WP40053901-Drain Hose with Rubber Elbow 11742254-3-S-Whirlpool-WP40053901-Drain Hose with Rubber Elbow Part Location Diagram of WP40053901 Whirlpool Drain Hose with Rubber Elbow
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Drain Hose with Rubber Elbow WP40053901

 Fits your ALW450QAC!
★★★★★
★★★★★
4 Reviews

Rated by 12 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 55.00
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your ALW450QAC!
PartSelect Number PS11742254
Manufacturer Part Number WP40053901
Manufactured by Whirlpool
Product Description

Drain Hose with Rubber Elbow Specifications

This hose attaches to the pump to help remove the water out of the washer. 7 feet in length.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer.
This part works with the following products:
Amana, Speed Queen, Crosley, Maytag.
Part# WP40053901 replaces these:
AP6009111, 34502, 37245, 37246, 38062, 38156, 39893, 39894, 40053901
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
4.0
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
BARBARA K - September 21, 2021
  Verified Purchase
easy to install on old machine
I have an older Amana machine that is still doing a great job. The external discharge had a split that leaked when spinning. Since the Amana is now owned by whirlpool it was easier than I thought to find the part and a video on how to replace the hose which requires getting into the inside of the machine. The job was easy and the part was exactly the same as the old one. It arrived in a couple of days. Very pleased.
★★★★★
★★★★★
Rob S - August 20, 2020
  Verified Purchase
GREAT
Very good quality. Arrived faster than promised. The YouTube video which is for another brand ( Amana I believe) works for the Commercial Speed Queen I have. Helps a lot to see it if you have done this before
★★★★★
★★★★★
Glenn S - April 29, 2019
  Verified Purchase
Waiting for my refund
I returned a part to you and you got it right away - I am still waiting for my refund. To hold my money for 7 to 10 business days - is a disgrace. Shame on you.
PartSelect logo
April 30, 2019
Hello Glenn, Thank you for the review. Sorry for wait for the refund. Once the part arrives back to us it goes through the returns department for inspection and to be restocked. Once approved for a refund it is sent off to the refunds department to be processed. The credit card company also requires a few days to post on their end. Very sorry for the inconvenience.
★★★★★
★★★★★
Pedro G - January 31, 2018
  Verified Purchase
satisfied
Yes, this was the perfect part, and it took no time to get here. Thanks!
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.2 / 5.0, 12 reviews. What's this?
Sort by:
  • 1
  • 2
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The hose on the washer been leaking and needed to be replaced.
After receiving the new hose we replaced the hose and tested the washer by running a rinse cycle. The new hose fixed the problem.
  • Mary Lou from NEW ULM, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cracked hose leaking
Hardest thing was moving washing machine away from wall. Two screws on panel. One screw for hose.
  • John from BAINBRIDGE IS, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water leaking when washing
I was at work but a friend of ours and my husband did the repair. But what I was impressed about is how fast we got the part. thanks a lot
  • Joyce from Gary, SD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washing machine was leaking
Wow! My husband and I researched the problem online and ordered the part after reading from others how to take the machine apart. We are very unhandy, so we felt quite an accomplishment fixing the drain hose with rubber elbow ourselves! Thank you for the diagrams that so clearly showed the part we needed to order.
  • Deborah from Boulder, CO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hole in Drain Hose
I disconnected the water supply line to washer and moved washer into open area. I removed the front panel of washer to gain access to drain hose. I removed hose and reinstalled new hose. I did turn the hose holder inside the washer as it allowed the old hose to rub against the housing support of the washer causing the hose to leak. I was glad that I read the article that someone mentioned in their repair. The new hose was somewhat difficult to maneuver through the back of the washer and through the part that held the hose; otherwise, it was rather easy. Thanks for the feed back on your web page.
Read less
  • Mike from Lithonia, GA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The thin walled plastic drain line got a pin hole leak
The washer is four years old.
This is the second time I needed to replace this same drain hose on this same washer since I had the machine
There is only my wife ant myself maybe, 2 -3 medium size loads per week - why I would have two drain lines develop the same problem in almost the same location in two years is disconcerting
There must be a design problem with the clear plastic hose - Suggest Maytag go to a thick walled rubber hose
The hole is alway inside the washer on the bottom just after the hose bracket - I suspect that something rubbing causing a small pin hole to develop - when the condition first starts it is very difficult to located -There will be water under the washer
Run the washer and discharge the water - to locate

The replacement must be made through the lower front removable panel - and is easier to do if the pump return hose is also disconnected from the pump

Be very carful with the thin wall replacement hose - very light weight plastic - do not pull across the floor of washer - it could easily get damaged

Your company did a get job getting the part to me - The Fed Ex track system was great
I could tell exactly where the delivery was al all times -
Read less
  • WALTER from Holualoa, Hawaii, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Wrench set
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drain hose had water leak
remove front cover disconnect water supply remove hose clamp,take drain line replace with new hose reconnect water supply replace front cover job complete.
  • William from New Lenox, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
0 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hose was in contact with bracket for tub causing the hose to wear thru.
Very easy repair. Removed the lower front panel of the washing machine (two screws) with nutdriver.

Removed hose clamp with pliers. Removed hose from machine. Replaced hose and ran thru a full cycle to check for leaks.

No leaks, back in business in under an hour. This time includes going out to garage and gather the two tools needed for the job and cleaning up the water that came out of the hose during the removal process.
Read less
  • Joseph from Groveville, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drain Hose had a crack and leaked
Removed front panel; loosened hose clamp at pump; removed existing drain hose. Easy part.
Installed new hose at pump and tightened hose clamp. Somewhat difficult.
1. Your hose design should be solid flexible rubber hose instead of corrugated type. Had rough time snaking hose to the pump.
2. Your future designs should have rubber hose or hard piping to the exit hole on the back panel and terminated in a male fitting, then connect flexible hose from fitting to drain line. Similar to "hot & cold " water connections.
3. For future customers- care should be taken installing the "black" portion ; it kinked on me 2 or 3 times because you have to keep rotating the entire hose to keep the "black" portion straight.
Read less
  • Bernard from Pinellas Park, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drain hose sprung a leak
simple as removing front panel from washer held on by two screws and the hose was right their. Took a few minutes to disconnect it from the pump and pull it out through the rear, then feed the replacement in and reverse the process. Piece of cake. Thank you.
  • Burton from Sutton, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Janice
October 9, 2017
I moved to a new home the drain hose is to short,.. what size hose. can i replace it.
For model number LW3503W2
PartSelect logo
Hi Janice, Thank you for your inquiry. This hose is 7 feet in length. There is a video on our website that you can reference on how to install the. You will find the video under part number PS11748248. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Doug
November 24, 2019
Why does end of drain hose reduce down in at very end
For model number Sav3710aww
PartSelect logo
Hello Doug, thank you for your question. I believe it is to allow the hose to fit on the drain pump port. I hope this helps.

Was this helpful?
Thank you for voting!
  • 1
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11742254
Manufacturer Part Number: WP40053901
Brand
Model Number
Description
Amana
6492-LWM-251
Washer - WASHER
Amana
6493-LWM-353
Washer - WASHER
Amana
6494-LWM-423
Washer - WASHER
Amana
6495-LWM-433
Washer - WASHER
Amana
6496-LWM-833
Washer - WASHER
Amana
6497-LW-9203
Washer - WASHER
Amana
ALW110RAW
Washer - Top Loading
Amana
ALW110RAW-PALW110RAW
Washer - Amana Washing Machine Model ALW110RAW-PALW110RAW (ALW110RAWPALW110RAW, ALW110RAW PALW110RAW) Parts
Amana
ALW210RAW
Washer - Residential
Amana
ALW210RAW-PALW210RAW
Washer - Amana Washing Machine Model ALW210RAW-PALW210RAW (ALW210RAWPALW210RAW, ALW210RAW PALW210RAW) Parts
Amana
ALW210RMC
Washer - Residential
Amana
ALW210RMC-PALW210RMC
Washer - AUTOMATIC WASHERS
Amana
ALW210RMW
Washer - Top Loading
Amana
ALW210RMW-PALW210RMW
Washer - AUTOMATIC WASHERS
Amana
ALW410DAW
Washer - Top Loading
Amana
ALW410DAW-PALW410DAW
Washer - Amana Washing Machine Model ALW410DAW-PALW410DAW (ALW410DAWPALW410DAW, ALW410DAW PALW410DAW) Parts
Amana
ALW430RAC
Washer - Top Loading
Amana
ALW430RAC-PALW430RAC
Washer - Amana Washing Machine Model ALW430RAC-PALW430RAC (ALW430RACPALW430RAC, ALW430RAC PALW430RAC) Parts
Amana
ALW430RAW
Washer - Top Loading
Amana
ALW430RAW-PALW430RAW
Washer - Amana Washing Machine Model ALW430RAW-PALW430RAW (ALW430RAWPALW430RAW, ALW430RAW PALW430RAW) Parts
Amana
ALW432RAW
Washer - Residential
Amana
ALW450QAC
Washer
Amana
ALW450QAW
Washer - Top Loading
Amana
ALW450QAW-PALW450QAW
Washer - Amana Washing Machine Model ALW450QAW-PALW450QAW (ALW450QAWPALW450QAW, ALW450QAW PALW450QAW) Parts
Amana
ALW480DAC
Washer - Residential
Amana
ALW480DAC-PALW480DAC
Washer - Amana Washing Machine Model ALW480DAC-PALW480DAC (ALW480DACPALW480DAC, ALW480DAC PALW480DAC) Parts
Amana
ALW480DAW
Washer - Residential
Amana
ALW480DAW-PALW480DAW
Washer - Amana Washing Machine Model ALW480DAW-PALW480DAW (ALW480DAWPALW480DAW, ALW480DAW PALW480DAW) Parts
Amana
ALW540RAC
Washer - Residential
Amana
ALW540RAW
Washer - Residential
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Drain Hose with Rubber Elbow
$ 55.00
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.