Quick Question!

Have you ever purchased from PartSelect.com before?

11742175-1-S-Whirlpool-WP3976584-Timer Assembly, 60 Hz.
11742175-1-S-Whirlpool-WP3976584-Timer Assembly, 60 Hz. 11742175-2-S-Whirlpool-WP3976584-Timer Assembly, 60 Hz. 11742175-3-S-Whirlpool-WP3976584-Timer Assembly, 60 Hz. http://www.partselect.com/Schematics/Maytag/VMIDHRO8.gif

Timer Assembly, 60 Hz.

PartSelect Number PS11742175

This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Timer will not advance.
  • Will not shut off.

Compare At

$123.55

You Save

$20.59

Your Price

$102.96
Order within the next 10 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.3 / 5.0, 1 reviews What's this?
1-1 of 1
 

24 of 38 people found this instruction helpful

Parts Used:
  • Timer Assembly, 60 Hz.
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Nutdriver, Screw drivers, Socket set, Wrench set
Customer: Mary from Red Bud, IL

Dryer ran but no heat

I removed the dryer rear upper cover to expose the start and cycle selection knob. My wiring diagram was in there. I removed the wiring on the rear of the cycle selection knob (timer assembly) locations were marked on the device. I ohmed the switch contacts for the heat circuit and had an open circuit through out the full rotation of the knob. I removed the 2 screws on the back of the timer assembly and the burnt contacts fell out. I removed the knob and 2 mounting screws and the device was out to retrieve my part numbers.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1