Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11742165
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
unplug dryerremove two corner screws on dryer control unitpull control unit toward you to dislodge and flip overremove back cover panelpull off timer knob on front of control unitunscrew timer from control unit- note orientation of timer so you can replace new timer correctlyholding new timer next to old timer in same orientation one by one, remover each wire using needle nose pliers and install each wire on new timer in corresponding location.DO NOT remove all wires at onceOnce all wires are relocated on new timer, position timer on control unit and screw back inReplace cover panel and slide control unit back into placere-install two corner screws to hold control unit on dryerre-install old knob on to timer (note flat side on timer shaft should align with flat side of knob hole)Plug in dryer and test timerTell everyone in the house how much you saved by repairing the dryer yourself
Help other customers find the most helpful instructions.
Were these instructions helpful?
I removed the 5 screws holding the back panel behind the timer. I removed the screws that secured the timer to the front panel. I removed the wires to the old timer and placed them on the new timer one at a time. I screwed the new timer onto the front panel and replaced the back panel.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.