Quick Question!

Have you ever purchased from PartSelect.com before?

11742149-1-S-Whirlpool-WP3967051-Snubber Strap
11742149-1-S-Whirlpool-WP3967051-Snubber Strap 11742149-2-S-Whirlpool-WP3967051-Snubber Strap http://www.partselect.com/Schematics/Whirlpool/MYU687OX.gif

Snubber Strap

PartSelect Number PS11742149

Sold individually.

This part works with the following brands: Whirlpool, Kenmore, Crosley.

This part works with the following products: Washer.

This part fixes the following symptoms:

  • Shakes and moves.

Compare At

$5.87

You Save

$.98

Your Price

$4.89
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 2 reviews What's this?
1-2 of 2
 

5 of 8 people found this instruction helpful

Parts Used:
  • Snubber Strap
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Elisa from San Francisco, CA

Broken rubber straps (4), tub shook too much

First opened lid up and took ring cover off tub. Then unscrew 4 back screws and lifted top up. I replaced all 4 straps, so this process is repeated 4 times: with rubber gloved hand, lift metal support stick up, remove white plastic safety lock, insert strap and replace safety plastic lock and metal support stick to original position. Then, after removing old strap from tup side, replace the new end. After all 4 all done, push back down ring in position over tub, and screw everything back. The hardest part was holding the metal stick up with the gloved hand (as it was oily and slippery), and using one hand to do the rest, Otherwise, a fast and easy job.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Snubber Strap
Level of Difficulty: Very Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Robert from YUMA, AZ

4 rubber snubbers were broke

After removing wash cover by unscrewing the 4 screws at the back, I disconnected the electric by pulling the plug connector, this makes for more room to get at the snubbers. Remove the ring that held the snubbers in place, replaced the 4 snubbers , replaced the ring, making sure the position is correct over the snubbers, replaced the cover. Very easy job

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2