Average Repair Rating: 2.9 / 5.0, 4 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Would not rinse or spin
Do not assume it is timer...my bad...had washer apart to begin with , looking for problem...(ALWAYS look at the lid switch,I did not)when i broke the timer,and realized that was NOT the problem,I ordered lid switch and timer , installed both in less than 20 minutes , putting entire washer back together about an hour.Hooked it up , and POW
... Read more!!!! IT WORKED!! lol!!!
relaced the timer, wich was not the prob. it was the switch on the lid that was bad , it was a seald switch that just came apart from what i have no idea, so i repaired the switch,
Damian from north port, FL
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
25 of 30 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer will not change to any cycle and lid switch will stay on position.
Washer would not complete cycles; typically would wash only but not drain and spin
Removed upper back and timer knob and then timer and wire jacket. After replacing timer, washer at first did not work, then completed one load of wash, then on second load, it stopped at end of wash cycle, except when I leaned on lid which evidently closed the spin cycle switch which appears to be loose. So I'm saving the old ti
... Read moremer which may be OK.
Read less
Gerald from Chicago, IL
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
58 of 69 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Russ Rogers
July 24, 2017
Can you tell me the date of manufacture on this washer? The serial number is cp2155545 thanks
For model number TAWX700JQ1
Hi Russ,
Thank you for your question. According to the serial number this product was manufactured in Clyde, OH, May of 2003.
Thanks again for the question !
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kelly
December 19, 2017
Washer does nothing but has a buzzing sound at certain spots on timer any info on what's wrong
For model number LSR8233JT0
Hi Kelly,
Thank you for your question. If your machine is not experiencing any other symptoms, it may be that your timer may need to be replaced. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Anthony
January 2, 2019
My Roper washer does everything but drain. After the number 6 on wash cycle it's dead all the way till rinse cycle. But it will not. Ripped it all apart. Nothing clogging this machine. And pump spins nicely. Lid switch is working properly too.
For model number RAS6233KQ0
Hi Anthony,
Thank you for your question. If the washer is not draining, There are some parts that you will need to check to see which ones are causing the issue. You will need to check the lid switch, the direct drive water pump, the direct drive motor coupling, the clutch assembly and the lid strike. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Mark
November 7, 2019
Would the timer control buzz if it is failing? I have a buzzing from timer control. Would part ps11742065 solve this? Nothing else is symptomatic about the washer.
For model number TAWX700JQ1
Hello Mark,
Thank you for your question. Yes, replacing the timer under part PS11742065 will fix the buzzing noise. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
