Quick Question!

Have you ever purchased from PartSelect.com before?

See part 9 in the diagram


PartSelect Number PS11742047

To release the knob, pull the tab at the backside of the timer.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, KENMORE®, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Timer will not advance.

Compare At


You Save


Your Price

Order within the next 1 hr and 54 mins and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 1 reviews What's this?
1-1 of 1

10 of 12 people found this instruction helpful

Parts Used:
  • Timer
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: William from Greenfield, IN

Timer/cycle contol unit stopped working

Unplug machine from electrical box. Removed two screws on front and two screws on back of contol panel. This allowed the panel to be tilted foreward. A needle nose pliers was needed to remove the black pin from the timer/cycle control unit to allow the dials to be removed from the front. The timer was pried out from the back of the panel using a flat head screw driver and the electrical connector was removed using a my finger nail to release the connector. The new timer was connected to the electrical connector and the unit was pressed back into the panel. The black pin on the new unit was pulled out to allow the dials to be reapplied to the front of the panel and then the black pin was reinserted. The panel was tilted back onto the washer and the 4 screws were put back into place. Once the machine was plugged back in it worked properly.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1