Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11742044
Sits in between the agitator base and upper agitator.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Removed the softerner dispenser and the inner cap and seal. Removed the mounting bolt. Pulled on Auger and entire agitator came out. I needed to separate the parts. It said to stand on the bottom and pull on the top. I am an "older" woman and after wrestling with it for an hour without success I waited for my nephew to come by to separate the two pieces. When he did, it popped apart and all the parts went flying. Poor guy thought he had broken it. After conviencing him that that was what I wanted it to do, he left. Dirrections weren't very clear as to what went on first and I didn't have the convience of seeing it before it flew apart. Finally put it together and replaced the bolt. To no avail, something was wrong. My sister was making the same repair at her house across the street so we double teamed it. She came over and told me that I needed to put the Bottom agitator in the machine, then the spacer thrust, then the auger, then the assembled cam and cam dogs, then the bolt. All went well and was working.......so we thought. Started a washer load and the washer started leaking water. Don't know why, still don't know why. All I did was remove everything, put it back the very same way, and it hasn't leaked since. Go figure!
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed bolt in center of agitator then slid agitator straight up and out replaced the dogs and the other parts that came with the cam kit i also replaced a few of the other parts that wear in the agitator ,you can actually re-cut the teeth on the dogs with a razor so that they will work again ,but new parts are very reasonably priced and the parts arrived very quickly the next day .
Removed the softner dispenser and lifted up the plastic piece under that. Used a 9/16th socket with a long extension and unscrewed the center bolt.Lifted the entire agitator parts off and out.Next had to get husband to separate the top from the bottom, it was really hard for me. I am a woman but not weak!! Replace the washer and the other 2 parts, and put it back together and it all took about 15 to 20 minutes. Easy repair, even for a woman!!!
Much like the other descriptions. I found the video helpful and this was the only vendor that had diagrams, so you could see how things went back together. When I popped off the top piece, everything went flying, as someone else mentioned, so the diagram was essential.
We also purchased from this site the agitator repair kit! The youtube videos were extremely helpful!
Went to website and found question to what problem i was having with washer and they gave me a list of parts to fix it. The video that showed me how to change the parts was very helpful. I replaced the Agitator Cam Kit and the thrust washer. It was very easy to do and watching the video before i started helped.
Pulled off softrener dispenser. Pulled out seal plu. Removed nut with socket and extension. Pulled out agitator. Separated agitator halves by holding lower part and jerking upper half up. Removed small parts and cleaned all. Replaced cogs in upper afitator and worn thrust washer between agitator haves w/lube on all, then reassembled.
Took the assembly apart, replaced the little plastic cogs that had dried out in storage while I was stationed in Italy and broke apart upon use when I returned. Works like it did when it was new now! It was easy with the detailed pictures and easy ordering. Shipped quick and was overall a great experience.
after i got the part... problem with fedex in my area had the washer going before the truck drove off. Very good instrection thanks
Removed agitator found the agitator dogs were broke, identified all parts needed ordered from PartSelect, recieved all parts , repair was very simple 10 min job , works great! Saved lots of money !
popped off the softener cap, removed inner seal cap, removed bolt holding the top agitator and removed top agitator by pulling up. Removed the ring holding the dogs in place. Replaced the dogs and slipped it all back together
removed the old parts and replaced with new ones it was simple parts were a perfect fit
remove the lid and screw pull out agitator and replaced it, very easy. My neighbor threw it out because of this, smh i just got a new washer for free
Bottom agitator worke fine, but top would not.Ordered new agiator cam kit and thrust spacer. Removed top agitator with a 3/8" socket, replaced cam kit and spacer.Washer agitates as new. Great parts blow-up drawing and in-stock as well. Thanks
The whole process is almost intuitive if you have taken things apart before. Pull up on the softener dispenser and remove it. Reach into the center of the agitator post, grip the handles on the sealing disc, twist and pull to remove. This exposes the bolt holding the agitator down. Use an 11mm socket and an extension to remove the bolt. Pull the assembly in one piece. Separate the top from the bottom carefully, remove the cam assembly from the top section. Place the new asssembly in its place and reassemble the agitator in the reverse order. When reinserting the sealing disc, clean the surfaces carefully, coat the O-ring with liwuid soap, and twist the disc while pressing down to ensure a good seal.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.