Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Maytag/TDCZKLKJ.gif
See part 9 in the diagram
http://www.partselect.com/Schematics/Maytag/TDCZKLKJ.gif

Timer, Control (60 Hz.) (Motor

PartSelect Number PS11742042

To release the knob, pull the tab at the backside of the timer. This timer controls the operations of your washer: water level, length of cycles, and sequences.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Timer will not advance.

Compare At

$163.44

You Save

$27.24

Your Price

$136.20
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 1 reviews What's this?
1-1 of 1
 

9 of 15 people found this instruction helpful

Parts Used:
  • Timer, Control (60 Hz.) (Motor
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Gary from Maple Grove, MN

Timer was bad.

I removed 4 screws holding the trim and timer mechanism.There is 1 phillips screw holding the timer to remove,and a plastic piece to pull out from the back of the timer.I easily pulled it off,and the timer fell right off.I removed the wiring harness,and removal was done.Installing the timer was a reversal of the process.Slide the timer in place.install 1 screw,snap wiring harness on.push timer dial on,shroud back in place and 4 screws to put back in. The whole process took me 15 minutes,and is a very simple fix.My wife was thrilled,and I was the hero!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1