Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11741939
The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
NOTE: You should use your washer's model number to verify that this is indeed the right timer for your machine. Though many timers look alike, they are actually quite different.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Unplugged power to the washer. Moved washer out from wall just about two feet. Removed the two screws holding on the top decorative piece, then the three screws holding the back of the control box on. There were two screws holding the old timer in. I had to look at the new timer to see that the turn-knob unscrews counter-clockwise from the timer shaft. Unplugged the single cable connector from the old timer, plugged it to the new timer and screwed everything back in. It was a snap and the washer was back up and running perfectly. Replacing a mechanical timer is a breeze. It took me longer to find my nutdriver than to complete the repair.
Help other customers find the most helpful instructions.
Were these instructions helpful?
I removed a few screws from the control panel, pulled the multi-conductor cable out of the main timer /control. Removed two retaining screws holding the timer to the front panel with a 1/4 inch nut driver. I unscrewed the control knob, removed the timer, replaced the timer and reconnected the multi-conductor plug. It took less than 20 minutes to complete. It was the fastest appliance repair I've ever done. I noted that after 13 years of use, several of the electrical contacts on the old part were burned, which is expected after more than a decade of use. This repair was a "no- brainer".
Replaced the timer and it worked fine then. Was going to replace the washer due to it's age, but checking with you guys about the problem and replacing the timer saved me a bunch of $$$!Thanks for all of your help!
removed screws holding upper cover, removed screws holding lower cover, removed screws holding timer in place. unplug old timer, plug in new one, reassembled. Easiest thing I did all day and saved several hundred dollars!! Will certainly order from part select in the future.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.