Quick Question!

Have you ever purchased from PartSelect.com before?

11741871-1-S-Whirlpool-WP358684-Strike, Lid
11741871-1-S-Whirlpool-WP358684-Strike, Lid 11741871-2-S-Whirlpool-WP358684-Strike, Lid 11741871-3-S-Whirlpool-WP358684-Strike, Lid http://www.partselect.com/Schematics/Maytag/YQVV2IYF.gif

Strike, Lid

Compare At

$5.87

You Save

$.98

Your Price

$4.89
Order within the next 17 mins and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11741871
Manufacturer Part Number WP358684
Manufactured by Whirlpool

This part is used to activate the lid switch when the lid opens/closes.

This part works with the following brands: Whirlpool, Kenmore, KitchenAid, Roper, Estate, Inglis, Crosley, Maytag, Amana.

This part works with the following products: Washer, Washer Dryer Combo.

This part fixes the following symptoms:

  • Will not drain.
  • Timer will not advance.
  • Will Not Start.
  • Will not agitate.
  • Pumps but will not spin.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.0 / 5.0, 4 reviews What's this?
1-4 of 4
 

143 of 166 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers, Wrench (Adjustable)
Customer: Fred from Midlothian, VA

Washing machine kept cutting off mid-cycle

I had to remove the washing machine from the laundry room (our laundry room is pretty small).

I read the do-it-yourself explanation posted by Paul From Glendale CA and followed his instructions.

1. Unplugged the Washer and disconnected the hoses, so I could slide the washer into the kitchen.

2- Unfastened the two screws in the front lower corners of the controls panel and tilted is back. Unfastened the old lid-switch wiring from the control panel.

3. Remove the clips at the two corners under the control panel. I rotated the cover forward to clear it from the back and lifted it off and set it off to the side.

4. While I had the Washer disassembled I vacuumed out all the accumulation of dust, etc.

5. Removed the lid switch and unfastened the ground wire.

6. Installed the new switch and reassembled the Washer.

7. I did not read Paul's reassembly instructions closely enough. The front flange of the cover goes UNDER the steel frame on the washer. I spent 30 minutes trying to get the cover on, then finally figured that out on my own. Once I got the flange under the frame, it took about five minutes to get the cover on, the clips in and the control panel back into positions and reassembled.

The entire process is not particularly difficult. Had I read the "UNDER the frame" part earlier, the entire repair would have taken no more than 45 minutes.

Having another person to help reinstall the cover would be helpful. The cover is not heavy but it is a little awkward to handle and having another person to help line up the back cover, etc. will make the reassembly even easier.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

54 of 98 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers, Screw drivers, Wrench (Adjustable), Wrench set
Customer: Kenneth from El Paso, TX

Machine would stop when finished rinse cycle and wouldn't spin or drain.

I replaced the Lid Switch and the unit works fine. I also cleaned up some other issues in the unit which took about half the time.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16 of 21 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: LARRY from LUCERNE, CA

Shut off before finished

i knew the lid sw. must be bad and had a new one in hand, but when i remove the sw. ( near the lid ) i found the wires going back to where i could not reach. was not sure how to get at them so i repaired the sw. with tape untill i could find how to get at the wire end. after reading more in this repair area i know that i need to remove the control panel which is easy to do. next time i will read all i can on repairs in this section!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

15 of 18 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers, Socket set
Customer: Matt from Sussex, WI

Washer did not spin.

First I removed the two screws on the back side of the switch panel and tilted it back to expose the controls. I then pryed up the top of the washer to expose the lid switch. This was a mistake because I damaged the clips and bent the metal frame. Anyway after that I unlatched the lid switch on the top side, pulled it through the bottom, removed two screws holding the lid switch in place and replaced the switch and lid switch strike. Because I wrecked the machine top I had no alternative but to drill two holes from the top and put two screws in to hold the top down. It's ugly but it works.
The best part of all this is I received the part so fast that I was able to keep up the pace of doing laundry with no interruption. Thanks for being so reliable and quick to deliver. I already told many people about your service!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11741871
Manufacturer Part Number: WP358684
Brand Model Number Description
Kenmore110088732791Washer Dryer Combo
Kenmore11020112000Washer
Kenmore1102011200AWasher
Kenmore11020132000Washer
Kenmore11020132001Washer
Kenmore11020172000Washer
Kenmore11020172001Washer
Kenmore11020272000Washer
Kenmore11020272001Washer
Kenmore11026051690Washer
Kenmore11026058690Washer
Kenmore11026071690Washer
Kenmore11026071691Washer
Kenmore11027112600Washer
Kenmore11027172600Washer
Kenmore11027172601Washer
Kenmore11027272600Washer
Kenmore1102870090Washer
Kenmore11029012990Washer
Kenmore11029032990Washer
Kenmore11029072990Washer
Kenmore1102970093Washer
Kenmore11042182200Washer
Kenmore11042182201Washer
Kenmore11042722200Washer
Kenmore11042722201Washer
Kenmore11048182790Washer
Kenmore11048182791Washer
Kenmore11048184790Washer
Kenmore11048184791Washer