Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11741866
This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
Pretty simple, I removed one of the screws that holds the agitator, pulled it up completely and put the new one in. Took me 5 minutes to do so.
Help other customers find the most helpful instructions.
Were these instructions helpful?
The cam in the agitator of the Whirlpool Ultimate Care II (LSQ7533JQ0) was a little different than the instructions and videos I could find on the web. The difference is that the cam has tabs that keep the cam in place with the agitator. I had to try to pry the tabs loose enough so that when I stood on the agitator base and then pulled up on the part of the agitator that pulls the clothes down, only then would the cam finally pop loose. Once I was able to do that, everything was easy to replace.
First, know that I am the least mechanical person in the world. Second, kudos to this website. Diagnosis was perfect, and the kit worked perfectly! If I were able to do this in under a half hour... anybody will be fine. Be sure to get the grease separately... I used silicone gel because that's what I had.Saved about $90 probably!
The directions that came with the parts were very helpful.1. Removed the softener dispenser.2. Removed the bolt at the bottom of the exposed agitator.3. Pulled up the agitator assembly.4. Installed new parts.5. Reversed process.
Removed softner dispenser on top of agitator. Removed next was cap and seal cover at base of the agitator by just pulling it up. Used 1/4" drive w/ 7/16" socket w/long extension to remove the agitator mounting bolt. While holding the bottom of the auger, pull the agitator up, removing the top agitator assembly. Replace the necessary worn parts. Read the directions which came with your ordered parts. Also, the agitator grease which you are to use to lube the top of the Thrust washer is not included in the repair kit. You can use non water soluable grease to lube the thrust washer or order part number 350849. Total time, 15 minutes. Happy washing...
Repair was very easy for me and I have three fingers missing on one of my hands. Video on repair was also very detailed. I ordered three extra parts that were already included in the agitator kit. Would have been nice if all parts were listed that came in the kit and add a small tube of the grease. Delivery time was great! I would order from this company again, I was very pleased. I have already referred a friend to the site for her repairs.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.