Quick Question!

Have you ever purchased from PartSelect.com before?

11741866-1-S-Whirlpool-WP358237-Screw & Washer (5/16-24 x 1)
11741866-1-S-Whirlpool-WP358237-Screw & Washer (5/16-24 x 1) 11741866-2-S-Whirlpool-WP358237-Screw & Washer (5/16-24 x 1) 11741866-3-S-Whirlpool-WP358237-Screw & Washer (5/16-24 x 1) http://www.partselect.com/Schematics/Maytag/TEBJZIYW.gif

Screw & Washer (5/16-24 x 1)

PartSelect Number PS11741866

Manufacturer Part Number WP358237
Manufactured by Whirlpool

This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".

This part works with the following brands: Kenmore, Whirlpool, KitchenAid, Roper, Estate, Maytag, Inglis, Crosley, Amana, Admiral, Magic Chef.

This part works with the following products: Washer, Washer Dryer Combo.

Compare At

$5.56

You Save

$.93

Your Price

$4.63
Order within the next 6 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 51 reviews What's this?
46-51 of 51
 

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: Joseph from Sammamish, WA

Agitator was not spinning

Pretty simple, I removed one of the screws that holds the agitator, pulled it up completely and put the new one in. Took me 5 minutes to do so.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: Jay from Waxhaw, NC

Cam wouldn't come loose

The cam in the agitator of the Whirlpool Ultimate Care II (LSQ7533JQ0) was a little different than the instructions and videos I could find on the web. The difference is that the cam has tabs that keep the cam in place with the agitator. I had to try to pry the tabs loose enough so that when I stood on the agitator base and then pulled up on the part of the agitator that pulls the clothes down, only then would the cam finally pop loose. Once I was able to do that, everything was easy to replace.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Wrench set
Customer: Brian from Clinton Corners, NY

Wouldn't agitate correctly

First, know that I am the least mechanical person in the world. Second, kudos to this website. Diagnosis was perfect, and the kit worked perfectly! If I were able to do this in under a half hour... anybody will be fine. Be sure to get the grease separately... I used silicone gel because that's what I had.

Saved about $90 probably!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

17 of 351 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Wrench set
Customer: Ernie from Beaumont, TX

The teeth on the one-way clutch of the upper part of the agitator were stripped.

The directions that came with the parts were very helpful.

1. Removed the softener dispenser.
2. Removed the bolt at the bottom of the exposed agitator.
3. Pulled up the agitator assembly.
4. Installed new parts.
5. Reversed process.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

28 of 703 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Raymond from Speedwell, TN

Cam dogs worn out and the agitator wouldn't rotate.

Removed softner dispenser on top of agitator. Removed next was cap and seal cover at base of the agitator by just pulling it up. Used 1/4" drive w/ 7/16" socket w/long extension to remove the agitator mounting bolt. While holding the bottom of the auger, pull the agitator up, removing the top agitator assembly. Replace the necessary worn parts. Read the directions which came with your ordered parts. Also, the agitator grease which you are to use to lube the top of the Thrust washer is not included in the repair kit. You can use non water soluable grease to lube the thrust washer or order part number 350849. Total time, 15 minutes. Happy washing...

Help other customers find the most helpful instructions.

Were these instructions helpful?   

24 of 699 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: peggy from johnston, RI

Agitator top not working

Repair was very easy for me and I have three fingers missing on one of my hands. Video on repair was also very detailed. I ordered three extra parts that were already included in the agitator kit. Would have been nice if all parts were listed that came in the kit and add a small tube of the grease. Delivery time was great! I would order from this company again, I was very pleased. I have already referred a friend to the site for her repairs.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

46-51 of 51