Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11741759
This seal comes with the adhesive backing.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Great! Spent about $36.00 and I ended up with a overhauled dryer. I ended up cleaning the whole thing out, it's amazing how much stuff accummulates in the frame of a dryer, I also found about $2.00 in change. It's a good idea to clean out a dryer every few years and the broken belt forced me to do it. But anyway the parts cam very quick and had easy to follow directions. I would reccomend part select. Matt
Help other customers find the most helpful instructions.
Were these instructions helpful?
replaced motor and drum rear seal as well as idler wheels, the old rear drum seal was completly worn out, since I had it all apart, I replaced lint chute and trap seals and belt and tensioner. I spent less money on parts than if I would have bought a new dryer. The motor was the main problem as the bearings were shot.
removed frt & rear panels & drum and lint chute for seal replacement replaced these components, problem didn't go away, ordered & replaced both gas valve coils (m series coil kit) problem solved
I took the long way around and removed the back with the nutdriver (8mm), unscrewed the lint catcher from the top and back (phillips). From there, I reached around and unscrewed the support brackets (9/16"). Once I confirmed the problem, I ordered the parts. There was really nothing wrong with the belt or pulley, but considering its age, I figured it was easier to replace now while I already had it apart.Once I received the parts (about 3 days), I removed the front of the dryer by popping the top of the cabinet off, and the kick plate at the bottom with a flat screwdriver. Then, I removed the two screws holding up the door at the bottom, and the two holding it from the inside top. Once the front came off, I removed the idler pulley from the bottom, and the drum fell out. I was left with an empty cabinet with the exception of the motor.I replaced the tri-rings on the support shafts, which was the most time consuming part of the whole ordeal. Those buggers are tight. I ratcheted the support brackets back on , removed the belt from around the drum and replaced it with the new one. I added the idler pulley back in, placed the drum against the back, and hooked the belt back around the motor. I also replaced the lint seal that goes from the drum to the catcher before putting it all back together.I wish all machines were as easy as this dryer to repair.
I went on partsselect.com's web site, punched in the model number and easily found the parts I needed. Parts arrived in two days. Repairs went well, especially when my wife was my tool assistant! I recommend this site as a must for do it yourself repairs that will save you a lot of money.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.