Quick Question!

Have you ever purchased from PartSelect.com before?

11741733-1-S-Whirlpool-WP3412D024-26-Sealed Burner Cap with Electrode
11741733-1-S-Whirlpool-WP3412D024-26-Sealed Burner Cap with Electrode 11741733-2-S-Whirlpool-WP3412D024-26-Sealed Burner Cap with Electrode 11741733-3-S-Whirlpool-WP3412D024-26-Sealed Burner Cap with Electrode http://www.partselect.com/Schematics/Maytag/42431.gif

Sealed Burner Cap with Electrode

PartSelect Number PS11741733

This burner cap assembly is sold with the spark electrode. Please note this part has been redesigned and no longer requires a gasket. Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Gas igniter glows, but will not light.
  • Will Not Start.
  • Element will not heat.
  • Gas smell.

Compare At

$48.68

You Save

$8.11

Your Price

$40.57
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 21 reviews What's this?
16-21 of 21
 

2 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Dan from Castaic, CA

Melted electric kettle onto gas burner

The repair was a simple replacement, no tools needed. The old burner and grate came out as easily as the new parts went in. PartSelect Customer Service Rep D. Hanham helped me find and order the correct grate. Great Customer Service!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 5 people found this instruction helpful

Parts Used:
  • Sealed Burner Cap with Electrode
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Pliers
Customer: michael from Dallas, TX

Burners would not light

replace burner-had to hit old burn with rubber mallet to break off grease and took old burner off-two wires were connected to it..put those on new burner and was done--have a little problem--flame is lower now than it was-but it turns on

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Sealed Burner Cap with Electrode
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Joe from Staten Island, NY

Original burner was eroded on the bottom and flame was coming from undernealth the burner

Very easy. I disconnected the original burner with one turn as well as the two wire connections for the electronic igniter. I then connected the wires to the same positions on the new burner and placed the new burner in place with one half turn to match the indented openings to secure the burner tightly in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 4 people found this instruction helpful

Parts Used:
  • Sealed Burner Cap with Electrode
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Dennis from Wheaton, IL

The burner would not lite. There was an intermittent spark from that burner.

Your site was easy to navigate, which made determining the problem from other customers easy, and choosing the correct part to replace the malfunctioning burner.

The malfunctioning burner was easy to remove by twisting it a quarter turn counter clockwise, removing the two wires and replacing it with the new burner cap with electrode.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Sealed Burner Cap with Electrode
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Kathryn Truax from Key West, FL

All the burner caps had badly rusted; tip-off was the smell of gas.

Our handyman took off the burner caps and checked after we reported smelling gas. We ordered the replacements here, and they arrived by only the 2nd business day, instead of 3-5 as expected. The only hard part was scouring off the rust, with SOS pads, from the stove top before putting on the new burner caps (a simple plug-in)!! This is very important to check on your stove; you could blow-up your house! The gas was escaping under the old burner cap, through the rusted-out portions.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: carlos from san jose, CA

Burner would not start.

Removed and replaced old burner. ck'd ok.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16-21 of 21