Quick Question!

Have you ever purchased from PartSelect.com before?

11741675-1-S-Whirlpool-WP3403M075-10-Burner Head
11741675-1-S-Whirlpool-WP3403M075-10-Burner Head 11741675-2-S-Whirlpool-WP3403M075-10-Burner Head http://www.partselect.com/Schematics/Maytag/53468.gif

Burner Head

PartSelect Number PS11741675

The spark igniter is sold separately.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.

Compare At

$92.92

You Save

$15.49

Your Price

$77.43
Order within the next 10 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 4 reviews What's this?
1-4 of 4
 

54 of 56 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Joellen from Castro Valley, CA

Gas burner head on stove top rusted out producing blue flame where there shouldn't be

Removed stove top module and unscrewed the bottom panel. Burner head rotated out fairly easily. I ordered both the burner unit and the igniter just to be safe even though the old igniter still worked. I used the other module as a guide to reassemble the unit. The new burner head was little difficult to rotate back in and did not rotate quite as far as the original so the gas pipe was just a fraction out of alignment but there is some flex so it worked out OK when it was re-installed. Everything worked perfectly when I turned on the burner and there are no gas leaks and no blue flames where there shouldn't be!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

15 of 15 people found this instruction helpful

Parts Used:
  • Burner Head
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Nikhil from Houston, TX

Flames from below the burner

Replaced fairly easily all 4 burners as the old ones were totally rusted and cracked (the reason why the flame emitted from below the burners)

Help other customers find the most helpful instructions.

Were these instructions helpful?   

11 of 13 people found this instruction helpful

Parts Used:
  • Burner Head
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Armando from Ovilla, TX

Gas was escaping from the bottom of the burner causing a big flare up

Mom and Dad are old now and when a repairman quoted them 225.00 to repair their stove top I told them to tell the repairman to take a hike. I found your website very easwy to navigate and ordered the part which cost about 27.00 with shipping. When the part arrived, I just had to use a phillip head screwdriver and repaced the burner in about 15 minutes. It worked GREAT!!. Mom called me over today for some good homade cooking....Thanks Partselect!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 8 people found this instruction helpful

Parts Used:
  • Burner Head
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Chris from Larkspur, CA

Burner heads corroded and leaking

Remove 7 screws to remove cover. Disconnect ignitor wire. Unscrew gas supply. Twist burner head to remove (can be difficult). Reverse procedure.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4