Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Maytag/58275.gif
See part 19 in the diagram
http://www.partselect.com/Schematics/Maytag/58275.gif

Electronic Control

PartSelect Number PS11741587

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$491.06

You Save

$81.84

Your Price

$409.22
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 2 reviews What's this?
1-2 of 2
 

8 of 12 people found this instruction helpful

Parts Used:
  • Electronic Control
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set, Wrench (Adjustable)
Customer: Grant from North Fork, CA

No power to the machine after power outage

I removed two screws that held the top on,and removed top. I then rermoved screws that held control module in place. Disconnected the wires. I then placed new module in place,and plugged in wires. I also added a vibration sensor, that came with the new part. Plugged in machine ,and tested it as per the instructions. Everything worked as it should. Fixed the problem

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 7 people found this instruction helpful

Parts Used:
  • Electronic Control
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: George from Salem, CT

Power surge disabled washers electronic control board

The control board arrived the day after it was ordered which was a good sign of this stores devotion to customer service. The part that I received was an exact fit with no modifications or adapters required. One pleasant surprise was that it also came with a motion sensor which plugged directly into the control board and was hard mounted on the washers upper plate with existing hardware. This sensor completely eliminated the vibration issue we had with the washer since it's purchase and was a super simple install. As a matter of fact this entire install required nothing more than a philips screw driver and about twenty minutes of my time to plug in the harnesses and reinstall all of the fasteners ( along with the upper and rear panels to the appliance ). Nice product and a quick repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2