Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Maytag/58654.gif
See part 5 in the diagram
http://www.partselect.com/Schematics/Maytag/58654.gif

Front Door Cover - Gray/Silver

PartSelect Number PS11741574

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, KENMORE®, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Lid or door won’t close.
  • Lid or door will not open.

Compare At

$139.07

You Save

$23.18

Your Price

$115.89
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 1 reviews What's this?
1-1 of 1
 

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools:
Customer: Augie from BERKELEY, CA

Front door broken off hinge

Unscrew all phillips head screws in the back of the door and the washer door will separate so that you can get the door off the hinge. Once you do that, you can remove the plastic gasket by depressing the area near the holder tabs gently (they will break if you're rough!). Put the plastic gasket in the new door cover and give a good whack on it over the tabs to make sure they go in. Before you put the glass holder on, take the hinges off from the washer. Once the screws are off, push the hinge up to get it out, then put it in the door cover/glass holder and screw everything back in. Now with the door and hinge together, put it back in the washer and then push down on the hinge to make sure the screw holes will line up. Put screws back in and done!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1