Install videos!
11741561-1-M-Whirlpool-WP34001292-Shock Damper - Rear
Part Location Diagram of WP34001292 Whirlpool Shock Damper - Rear
See part 26 in the diagram
Replacing your Maytag Washer Shock Damper - Rear
( Grid squares measure 1x1 inch )
11741561-1-S-Whirlpool-WP34001292-Shock Damper - Rear 11741561-2-S-Whirlpool-WP34001292-Shock Damper - Rear 11741561-3-S-Whirlpool-WP34001292-Shock Damper - Rear Part Location Diagram of WP34001292 Whirlpool Shock Damper - Rear Replacing your Maytag Washer Shock Damper - Rear
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Shock Damper - Rear WP34001292

 Fits your MAH9700AWW!

Rated by 1 customer 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 93.89
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your MAH9700AWW!
PartSelect Number PS11741561
Manufacturer Part Number WP34001292
Manufactured by Whirlpool
Product Description

Shock Damper - Rear Specifications

This part helps keep the washer from vigorous shaking during its cycles. They are sold individually. They mount to the rear half of the outer tub. Appliance would take 2.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Maytag Washer Shock Damper - Rear

Replacing your Maytag Washer Shock Damper - Rear
Back to Top
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Maytag, Amana, Inglis.
Part# WP34001292 replaces these:
34001292
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.3 / 5.0, 1 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Vibration during spin dry cycle
Moved unit forward to gain access and then removed rear panel with Phillips screwdriver.

At this point it was very important to protect arms and hands due to sharp edges within the unit!

Be advised, the bolts may be a little tight...hence the protection mentioned above. The socket tends to "pop off" due to the awkward angles involved. The washer basket has some nasty little extrusions which can cause blood blisters if you bounce off the basket!

Using 1/2" socket (and small extension) removed mounting bolts and extracted the dampers.

Install new dampers, using thread lock on the bolts.

Re-install the back cover with the Phillips screwdriver and push the unit back in place.
Read less
  • Raymond from BEAUMONT, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mel
September 30, 2017
I was moving and my back shock damper/absorber came loose. How do i connect the back
For model number MAH8700AWW
PartSelect logo
Hi Mel, Thank you for your question. With this particular shock absorber, there is a little head on each end. You slide that into the slot where it is held. Then turn it 90 degrees to lock the part into place. You do the same thing on the drum side as well. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Back to Top
You May Also Need ?
Shock Damper - Front
$95.15
$95.15
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741561
Manufacturer Part Number: WP34001292
Brand
Model Number
Description
Inglis
IFW7200TW10
Washer - Residential, Automatic
Maytag
MAH6700AWM
Washer - Residential
Maytag
MAH6700AWW
Washer - Residential
Maytag
MAH8700AWM
Washer - Residential
Maytag
MAH8700AWW
Washer - Residential
Maytag
MAH9700AWM
Washer - Residential
Maytag
MAH9700AWW
Washer - Residential
Amana
NFW7200TW10
Washer - Residential
Amana
NFW7200TW11
Washer - AUTOMATIC WASHER
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Shock Damper - Rear
$ 93.89
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.