Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11741531
They are all strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used to dry the clothes in your dryer.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Don't pay a repair service for this job when you can do it yourself. Pop the two panels off the back of the machine. The top one is where you'll unhook the old heating element. The bottom one (where the exhaust is) is where you'll need to unhook the broken heating element from it's connector. Place the new heating element's wires down through the back of the machine, plug the wires in (note - this is a 3-prong plug and it should only fit one way - the correct way) to the connector, and re-assemble. Note: make sure that the exhaust pipe is secured back in its base. Getting the bottom panel back on is a little tricky, but you'll get in after a couple tries!
Help other customers find the most helpful instructions.
Were these instructions helpful?
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.