Part Location Diagram of WP3400012 Whirlpool Installation Screw
See part 13 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Installation Screw WP3400012

Rated by 6 customers 

Very Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 7.76
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11741512
Manufacturer Part Number WP3400012
Manufactured by Whirlpool
Product Description

Installation Screw Specifications

This screw is sold individually.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Door won’t open or close | Clicking sound
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Maytag.
Part# WP3400012 replaces these:
AP6008377, 3400012, W10029760, W10142285
Back to Top
Customer Repair Stories
 Average Repair Rating: 5.0 / 5.0, 6 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Fridge door not closing properly.
Romove food and shelves from the door. Remove the 4 screws on the top hinge and higne cover. My door stayed closed but you may need an extra person to hold the door. Lift the door off of the bottom hinge. Replace the parts and re-install. Under 15 minutes total by myself. The door weighs around 20 punds I would guess but again a second person due to the size might be helpful for some.
Other Parts Used:
Installation Screw Bracket, Door Stop (Black) Lower Door Closing Cam
  • Chris from NILES, MI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator door not closing properly
We’d had the refrigerator repaired a year ago by the service department of our local appliance store. Turns out the service tech somehow used the wrong screw when replacing the door cam, causing it to rub on the cams and causing premature wear. After watching the provided repair video, it took about 10 minutes to remove the door, replace the cams and reinstall the door. Saved well over $100 and had the job done right this time.
  • Bruce from MONTGOMERY, AL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
refrigerator door would not stay closed , I would close the door and it would bounce back out , I had to close the door by holding it closed each time I opened it
I watched the video, removed the top three screws , took the door off , put the door on the floor and removed the part with a socket.Then I put the new part in after lubricating . I picked the door up put it on the stem below , replaced the three screws and closed the door . The video was a big help was very easy to do and the part was quickly shipped .Thank you for all your help . Patricia
Other Parts Used:
Installation Screw Lower Door Closing Cam
  • Patricia from AUBURN, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The fridge side on side by side was slipping down and door would not close on its own. My daughter and I watched the video and replaced BOTH PIECES
Watched the video and it was very easy!! My daughter and I replaced BOTH CAM PIECES in less than 30 mins. Working like new!
Other Parts Used:
Door Cam - Black Installation Screw Lower Door Closing Cam
  • Linda from KANNAPOLIS, NC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fridge door would not seal
Removed the door and replaced the lower door cam. Old lower door cam was completly stripped. Insatalled new one and door sealed again! Yay!
Other Parts Used:
Installation Screw Lower Door Closing Cam
  • Amber from Wilton, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The refrigerator door was difficult to maintain closed
Because the lower cams are made out of hard plastic the repeated opening and closing of the door wore them out. The hardest part was taking all of the food that is normally stored in the door.

First step was to determine whether the screws were metric or US standard - they are metric. The next step was to remove the top hinge in order to remove the door and replace the bottom cams and brackets. This took a couple of minutes, replacing the cams was about 5 minutes and putting the door back on the pivot and reattaching the top hinge was another couple of minutes.

If I had called a service tech they would have charged a minimum of two hour and for the parts. I estimate that I saved myself about $100.
Other Parts Used:
Screw Installation Screw Bracket, Door Stop (Black) Utility Drawer Gasket - White Lower Door Closing Cam Door Cam - Black
  • Enrique from Tigard, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
96 of 107 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carolyn
February 17, 2023
what screw do i need for top of freezer door hinge?
For model number WRS325FDAW01
PartSelect logo
Hi Carolyn, Thank you for your question. If you need the white screw, the part number listed under your model number for it is PS11752507. If you need the black screw, the part number listed for it is PS11752508. If you would like to place an order for one of these screws, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741512
Manufacturer Part Number: WP3400012
Brand
Model Number
Description
Kenmore
10640212010
Refrigerator
Kenmore
10640212011
Refrigerator - REFRIGERATOR
Kenmore
10640262010
Refrigerator
Kenmore
10640263010
Refrigerator
Kenmore
10640263011
Refrigerator - REFRIGERATOR
Kenmore
10640269010
Refrigerator
Kenmore
10640562010
Refrigerator
Kenmore
10640563010
Refrigerator
Kenmore
10640563011
Refrigerator
Kenmore
10640569010
Refrigerator
Kenmore
10640569011
Refrigerator
Kenmore
10641012100
Refrigerator
Kenmore
10641012101
Refrigerator
Kenmore
10641012104
Refrigerator
Kenmore
10641014100
Refrigerator
Kenmore
10641014101
Refrigerator
Kenmore
10641014104
Refrigerator
Kenmore
10641122210
Refrigerator - REFRIGERATOR
Kenmore
10641122211
Refrigerator - REFRIGERATOR
Kenmore
10641122212
Refrigerator - REFRIGERATOR
Kenmore
10641122213
Refrigerator - REFRIGERATOR
Kenmore
10641123210
Refrigerator - REFRIGERATOR
Kenmore
10641123211
Refrigerator - REFRIGERATOR
Kenmore
10641123212
Refrigerator - REFRIGERATOR
Kenmore
10641124210
Refrigerator - REFRIGERATOR
Kenmore
10641129210
Refrigerator - REFRIGERATOR
Kenmore
10641129211
Refrigerator - REFRIGERATOR
Kenmore
10641129212
Refrigerator - REFRIGERATOR
Kenmore
10641129213
Refrigerator - REFRIGERATOR
Kenmore
10641152210
Refrigerator - REFRIGERATOR
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service