Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11741493
This part is used to start the dryer once you have selected a setting on the timer.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
unplug dryerpull off switch knobremove two screws at corners of control unitpull unit toward you to remove flip over and remove panelunscrew switch then twist switch to remove from face on control unitholding new switch next to old, remove wires from old switch and insert onto new switchplace new switch on control unit face and twist into positionInstall screwsreplace panel, flip back over position control unit and slide back to lock in placescrew in cornersreplace switch knob plug in dryertest switch
Help other customers find the most helpful instructions.
Were these instructions helpful?
It was as easy as 123 took off old part reconnected the wires put the srews on put the cover back and my dryer is working like new again thank you PartSelect for making my life a little easyer Anna Lavergne
opened the back of the control panel, removed the timer. Looked for damage, saw none but replaced because it was not working. The wirers did not match up extact. But enough matched the wire and terminal code that the two left attached to the two remaining. After it was plugged back in and tryed it worked!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.