Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11741441
With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 250 degrees Fahrenheit. The element will kick back in when the temperature drops to 190 degrees Fahrenheit. Differential of 60 degrees.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
PartSelect is great for providing parts as requested. Unfortunately, neither of the 2 parts I ordered were on my machine. My bad for not looking at the actual part instead of the description. A word to the wise!
Help other customers find the most helpful instructions.
Were these instructions helpful?
First I had to take the back cover off. I removed the heating element and the thermostat and replaced them with the new repairs. It was relatively simple---any handiman could do it and would not require a repairman. We talked to a salesman at Sears to see what they thought the problem could be and then got on the internet. The best part was that the repairs came within a few days of placing my order. That was super!!!Thank you for your fast response.
Measured resistance on thermostats & heating element. Found thermostat open so ordered replacement part and heat again.
Frist I looked on Parts Select site at there diagrams to figure out where the heating element was . After that it was easy to remove the back panel and expose the heating element box.The screw holding the element is a little hard to get too , but still easy to remove.You have to pull the box out a little to slide the element out. the only thing I did wrong was not buy both thermostates at the same time,and I had to spend a little more because the one part is not sold by itself. Over all a breeze
I followed the video offered by your website and it was very informative and right to the point. Was very brief and easy to follow. I ordered the parts before 10:00am and received the parts the next day with the regular shipping.Very good website others need to benchmark you. I will use your service for future repairs and refer you to others.
Removed the back of the dryer about 8 screws. Removed the Thermostat 250 F and replaced with new. Dries a load of clothes in one cycle on medium. Not bad for a 16 dollar part. I am a computer tech and I am used to taking computers a part but I think most people that are in anyway mechanically inclined and can look at a diagram could do this and save yourself a lot of money.
Removed rear panel after disconnecting the Power.Disconnected the fuse ,thermostat 250f, and replaced them. Then removed the old heater and installaled the new one. Then plugged in the heater and still no heat..So I have decided to replace cycling thermostat and temperature switch,which I ordered yesterday. These are the last two items that you suggest as being a cause.
Opened access door, noticed main power wire to heating element was partially melted. This was caused by a bad connection to the drying element, loose. Removed heating element assembly. Cut bad section of wire and added new connection. While doing this the thermostats plastic casing cap came off ! Probably due to exessive heat / resistance from the bad connection. This confirmed why there was no heat. Intalled new thermostat and and am now good to go !
Took, back cover out,but first i disconect the electricity,i give a fast look,looking for anything wrong and i saw a thermostar burn out in the element case,the bottom one,a thermostart250 f. but a did a search in the internet,and found that when a bottom thermostart burn out, the top one had to be change,so i did a continuity text in the top one and was open ,i have it,a used one, change and connect the dryer to the Electrical outlet and (walac)it start the dryer,problem solve
Took the back off, took parts off, replace parts. put back back on and turn on. Works great, directions were easy. Watch my wife do it. Very please/
I am really not sure because my husband did the repair and it took him no time at all. I know he removed the back panel on the dryer, and the 2 parts were in plain site. He took the old off put on the new part. We turned the dryer on and it worked better than ever! This site is the best for home repairs. My husband was a little leary but we didn't want to buy a new dryer and we live in a remote area with no repair people, so for the low cost of these parts it was well worth it! Will diffently use this site again!!!!!!!!!!
Installed fuse and two thermostat parts. Your system of correlating problem to part needed to fix the problem is a really good system.
there are four heat elements but the main one I chose to buy.Removedbacking plate then two screws holding and two wires.Replaced and wife was happy/Me too because $65 is cheaper than anew one.Also I am retired; so lots of time and very little money.
The first thing I did was google "whirlpool dryer repair drying takes too long" to determine all of the possible parts I needed to order (the result was 3 possible parts, a heating element and two different thermostats). I then went to www.partselect.com (I'm a repeat customer) and searched the parts using the dryer model number listed just inside the door. I then printed the dryer model diagram off of the www.partselect.com website to determine the location of all the parts and how to replace them. Our first purchase was the new heating element from the www.partselect.com website, received it in just a couple of days and replaced it, but that did not fix the problem. We then ordered the two thermostats, again received them in 2-3 days, replaced them, and were drying clothes in <30 min. in no time! All we had to do was unplug the dryer, disconnect the vent hose, take the back off, unscrew each thermostat, disconnect the wires, install the new thermostats, reconnect the wires, screw the thermostats back in place, replace the back cover, reconnect the vent hose and plug the dryer back in. It took <15 min. for the complete repair! Thanks, www.partselect.com! I will continue to be a repeat customer!!!!!
Repair was easy but still no heat to dryer
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.