Quick Question!

Have you ever purchased from PartSelect.com before?

11741405-1-S-Whirlpool-WP3387134-Thermostat, Internal-Bias
11741405-1-S-Whirlpool-WP3387134-Thermostat, Internal-Bias 11741405-2-S-Whirlpool-WP3387134-Thermostat, Internal-Bias 11741405-3-S-Whirlpool-WP3387134-Thermostat, Internal-Bias http://www.partselect.com/Schematics/Maytag/RSDYZ2AA.gif

Thermostat, Internal-Bias

Compare At

$17.95

You Save

$2.99

Your Price

$14.96
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11741405
Manufacturer Part Number WP3387134
Manufactured by Whirlpool

A cycling thermostat is in tune with the temperature of your dryer and regulates it in order to maintain a certain temperature. This thermostat reaches a temperature of 155 degrees and will then turn off and then on again once it has dropped by 25 degrees. If your dryer is not giving off enough heat, is over-heating, is not turning on, or is having issues with the timer functionality, this could indicate an issue with the thermostat. The installation of the cycling thermostat is simple and the only tool required is a 1/4 inch nut driver (and gloves for safety).

This part works with the following brands: Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Estate, Crosley, Inglis, Amana, Admiral, Magic Chef, Jenn-Air.

This part works with the following products: Dryer, Washer Dryer Combo.

This part fixes the following symptoms:

  • No heat or not enough heat.
  • Takes too long to dry.
  • Will Not Start.
  • Timer will not advance.
  • Too hot.
  • Shuts off too soon.
  • Will not shut off.
  • Will not tumble.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Recent

Question:

My dryer is turning on and “working” but it is not heating properly. It is a gas dryer and it doesn’t seem to have a problem igniting. What should I check?

Leo
Answer:

Hi Leo, we recommend testing the coils 279834 to see if they are faulty. You can test them using a multi-meter tool. Please let us know if you have any further questions.

4 people found this helpful.
Question:

My dryer is taking too long to dry the clothes in it and I am not over filling it. My friend suggested a blockage but we already checked for that. We also tried using the different settings and the only one that seems to be buggy and not working is the highest setting. So do you have any suggestions of parts to check or tests to try to fix this.

Dylan
Answer:

Hi Dylan, we recommend testing the temperature coming from the dryer when on high heat, which should be about 110 (low end) to 160 (high end) degrees. If your dryer is cycling before it hits the 150 degrees, you most likely have a faulty cycling thermostat. This can be tested with a multi-meter with temperature. Best of luck with this repair!

3 people found this helpful.

Most Helpful

Question:

I’m not sure how often this happens because it hasn’t happened to me or anyone I know before. But our dryer seems to be getting too hot during cycles. The clothes are way too hot when they come out, even on the lower settings. The heater element is still cycling on and off though which is think is normal. I’ve already checked the flow and the vents and everything seems to be square there. What would you recommend I check next. Do you think it’s the thermostat?

Kealan
Answer:

Hi Kealan, we recommend trying to dry a load with the vent unhooked from your dryer. If you are still experiencing these symptoms you could have a faulty dryer cycling thermostat WP3387134. I hope this helps!

5 people found this helpful.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.7 / 5.0, 143 reviews What's this?
 

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Ricardo from JOLIET, IL

Only cold was blowing

I take me less then 15 min easy to change parts all you need is a screwdriver and replace the parts save me some good money thanks.??

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: john from kennedy, NY

Our dryer wouldnt heat

it was very easy just had to take two nuts off and wires and reapply

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Thermostat, Internal-Bias
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: Michael from LAKE FOREST, CA

Heat stopped after a few minutes

Read this site and saw many fixed the problem with a new thermostat. Ordered one and it was simple to replace. Just removed the back panel of the dryer and the thermostat is right there. Two screws to remove it, swap the four wiring plugs onto the new one, reinstall it. Unfortunately that didn't fix it so went back online and ordered the coil kit, another common solution. Removed front of dryer by removing the two screws the hold the lint trap onto the top and the two hinge plate screws on back of dryer to tilt the top up ward and backward. Removed two mounting screws on inside of dryer front and slip front panel upward to remove. The coils are right in the front down at the bottom left of dryer.Used an offset screwdriver to remove the two screws holding them in place. They slide right out, one has two prongs, one has three. Replace them with the new coils and put them back in place. Reassembled and everything works now. Grand total of eight screws removed and replaced, pretty simple. I'd recommend buying two or three parts if you see several parts as possibilities for a repair. Easier than doing it the dummy way like I did!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Dawn from BAYVILLE, NJ

Only had one level of height and the timer would not move.

I followed the video that you had for each part and they were both in the same area. Finished in 20 min. It did not fix the timer from moving again but I do have different heat levels.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: kerry from OLEAN, NY

Dryer taking a long time to dry clothes.

There is a video that explains in full detail how to install. Unplug dryer. Remove screws to take back of dryer back off. Remove wires from part. Remove screw holding piece in place. Exchange old part for new part and screw back into place. Put wires back in part( they just snap into place) Put back to dryer back on with screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Thermostat, Internal-Bias
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: charles from cuba, MO

Dryer not getting clothes dry

removed door and front panel this exposed all the control devices I changed out the thermostat ndn repaired the dryer

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Screw drivers
Customer: Mark from MILPITAS, CA

Timer not advancing irratic heating

Gas Dryer, bought used over ten years ago. Timer not advancing, so I came to the site to check prices on a timer. Looked at troubleshooting guide and determined problem was most likely thermal fuse and not timer. Because thermostat was also suggested as potential problem, I bought that also. Figured it was cheap enough that since I had to go through aggravation of pulling dryer out, I only wanted to do it once,Pulled dryer out and unplugged it. Turn off gas valve, dis connect gas line at dryer with crescent wrench. Pull back panel using screw driver. Replace both parts. Clean lint from dryer, sweep area behind dryer and reassemble. About 40 minutes. Tested dryer, could feel heat, so A-ok. But, not really. Timer still not advancing, heat erratic. So, ordered coil kit. Unplug dryer. Remove 2 short phillips screws under lint trap door , pry top up. 2 screws removed with nut driver, lift front up and off. I can see coils readily accessible on bottom left. Using stubby phillips screwdriver, remove and replace coils. Clean lint, reassemble. Dryer works great, and repair was actually easier than anticipated after watching video. Close call, because wife as naggin' for new dryer. If the coil kit didn't work, I would have lost the argument!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers
Customer: Michael from HENRICO, VA

Not heating very well

I replaced the Thermostat, heating element and thermal fuse. Took 30 minutes and dryer is working fine

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Thermostat, Internal-Bias
Level of Difficulty: Very Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Socket set
Customer: Ed from GRAFTON, IL

Clothes never completely dry

I watched the video then called them to order parts. They were VERY helpful & NICE. I had the parts the NEXT day. I followed the video instructions & it worked. They made my day! THANK YOU JoAnn & Teresa!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Rodger from DURYEA, PA

The dryer would not heat up

I unplugged the machine and removed the back panel with a 1/4" socket. I unplugged each thermostat in turn and pulled them out. The internal bias was a bit tricky to remove without breaking the tabs or wires. I then placed each thermostat back in and replaced all the wires. Not bad at all. Weird thing is the dryer heats just fine now, until I put the back panel on; once I replace the back panel, it will not heat.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: JOHN from TULSA, OK

Dryer wouldn't start

removed the back panel as described in the tutorial. then removed the two parts as the repairman described, it took maybe 10 minutes beginning to end. Dryer works like a charm now.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Socket set
Customer: BRENTON from PITTSBURG, NH

Would not start

Thermal fuse open so I changed that and the thermostat to make sure it would cycle the heat.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Thermostat, Internal-Bias
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Sherry from TUJUNGA, CA

Clothes taking too long to dry.

The dryer was igniting when initially starting load, but didn't light again the rest of the cycle. On my model the access was through the front panel, didn't even have to pull dryer out. Open the door and there are two screws on each side.of the inside of frame. Remove screws and lift door off the the whole front of the pulls out and down and removes, and everything is right there to work on. Replaced thermostat, that took 5 min. But didn't fix the problem. So I purchased and replaced the "M" Series New Style Coil Kit, took about 10 min. I took olm/continuity readings b/t all terminals of the old and new coils and they were only about 5% difference, the old being a little lower. But that fixed the problem, works like new again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers
Customer: Vito from Levittown, NY

Dryer wouldnt turn on.

Followed the instructions in the video provided on the partselect website. The video's instructions were excellent. Simple removed the back comver of the dryer, located the parts and replaced them. It would have cost me at least $500 for a new dryer. At least $150 to have a repair man come. I did this repair myself for $45!! I highly recommend partselect.com.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: David from Green River, WY

Taking a long time to dry clothes

Replaced heating element, thermostats and fuse, cleaned dryer vent shafts and it is now working like when it was new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11741405
Manufacturer Part Number: WP3387134
Brand Model Number Description
Kenmore11060012000Dryer
Kenmore11060012001Dryer
Kenmore11060012002Dryer
Kenmore11060022010Dryer
Kenmore11060172000Dryer
Kenmore11060172001Dryer
Kenmore11060172002Dryer
Kenmore11060202990Dryer
Kenmore11060212990Dryer
Kenmore11060232000Dryer
Kenmore11060232001Dryer
Kenmore11060232002Dryer
Kenmore11060522900Dryer
Kenmore11060602990Dryer
Kenmore11060612990Dryer
Kenmore1106062110Dryer
Kenmore11060622990Dryer
Kenmore11060702990Dryer
Kenmore11060712990Dryer
Kenmore11060722990Dryer
Kenmore11060724990Dryer
Kenmore11060727990Dryer
Kenmore11060802990Dryer
Kenmore11060812990Dryer
Kenmore11060814990Dryer
Kenmore11060817990Dryer
Kenmore11060912990Dryer
Kenmore11061202010Dryer
Kenmore11061202011Dryer
Kenmore11061252010Dryer