Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11741378
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
Just snap in the pivot. No tools required. Be careful how you put it in because you could end up snapping it in half. Slide the shelf leg into the pivot first then snap the pivot on the rack.
Help other customers find the most helpful instructions.
Were these instructions helpful?
The part had to be bent slightly to fit over a bracketthat holds the tray, With the least bit of pressure tobend it, the new part broke. I will just have to remove the tray andleave it out, unless you send me a new part.m I can't afford to buy a new part again. I ma on retirement.
I hooked the pivot on the rack, poof!! Done. I put the spinner pieces together, (they don't need any tools) then I just snapped them in the upper "hole" where they belong and voila!! Done.
I read another person's instructions on this website. The most important and helpful was this: There is a support on the corner that can swing up against the right side or against the front. This support is one of two that holds the tray. Completely remove the leg of this support from the top broken piece and where it snaps into a piece on the bottom to hold it straight. Insert the leg into the dishrack pivot, snap the pivot into place on the edge of the front and edge of the right side. Then snap the leg into the bottom. Move the front and back supports to hold the tray, place the tray on top. That's it! Easy!
Just had to snap on new piece. Great website (detailed pictures really helped determine which piece I needed). Fast delivery. Thank you.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.