Quick Question!

Have you ever purchased from PartSelect.com before?

11741334-1-S-Whirlpool-WP3376846-Seal, Lower Sprayarm
11741334-1-S-Whirlpool-WP3376846-Seal, Lower Sprayarm 11741334-2-S-Whirlpool-WP3376846-Seal, Lower Sprayarm 11741334-3-S-Whirlpool-WP3376846-Seal, Lower Sprayarm http://www.partselect.com/Schematics/Maytag/UHLYYAGP.gif

Seal, Lower Sprayarm

Compare At

$7.33

You Save

$1.22

Your Price

$6.11
Order within the next 3 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11741334
Manufacturer Part Number WP3376846
Manufactured by Whirlpool

This dishwasher lower spray arm seal, or under spray arm bearing ring, is designed with the split by the manufacturer. It is not damaged or defective, and is sourced directly from the original manufacturer. This part is approximately 2 inches in diameter, made of plastic, and is white in color. This part is mounted underneath the dishwasher spray arm and creates a seal between the lower spray arm and the sump housing. To access the seal, remove lower dish rack and unscrew the nut that secures lower spray arm to the remove cover. No tools are required to replace the lower seal on your dishwasher.

This part works with the following brands: Kenmore, Whirlpool, KitchenAid, Estate, Inglis, Crosley, Roper, Maytag.

This part works with the following products: Dishwasher, Microwave.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Leaking.
  • Noisy.
  • Not draining.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 68 reviews What's this?
61-68 of 68
 

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Gary from Danville, IL

Dishwasher made a squeaking sound when running

The problem was the water powered lower swing arm bearing (bushing) had worn out (had rubbed away part of it's flat surface). First I removed the large screw with the big flat finger grip flanges on the top side of the lower swing arm assembly. this assemble looks like a big hub cap. Lift the assemble up and off the attachment stem. The bearing goes on top and the seal on the bottom. Both just push in place with your fingers. Reinstall the assemble on the attaching pivot point that it was removed from and secure with the large thumb screw first removed. Spin the assembley to check for any binding. Do not over tighten the thumb screw. Water pressure is all that drives this assembly and it should always turn with no obstructions.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: George from Carrollton, TX

Wash arm retainer nutt broke

First I ordered the correct parts. The repair involved removing Wash Spray Arm inserting the Lower Spray Arm Seal, peplacing the Wash Spray Arm, then inserting Wash Spray Arm Bearing Ring, the inserting and hand tightening Wash Spray Arm Retainer Nut.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Lynda from Syracuse, NY

Dishes weren't getting clean

After looking at the sprayarm, changing detergents and washing every speck off the dishes only to have them come out dirty I decided to replace the sprayarm seal and bearing ring. I didn't really need the sprayarm seal, but figured I had come that far I may as well. It went really well and now I have clean dishes. I spent $26 on parts but a service call is $70 and I still would have had to replace the parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Joseph from Spokane, WA

Washing poorly, irregular noise in wash cycle

I removed the old parts and replaced them with new parts. It failed to solve the problem.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: todd from woodstock, IL

Broken upper wash arm stabalizer bracket...

very easy to fix..i replaced many other parts while i was at it..figured i d "upgrade". washes much better now....less noisy..

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Wrench (Adjustable)
Customer: Judy from Arlington, TX

Wouldn't wash

Called my son in law and he did it

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Screw drivers, Wrench set
Customer: David from Hernando, MS

Leaking dishwasher

Installed all parts. Dish washer still leaks. Wasted my time and money.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Melissa from The Colony, TX

Wash arm retainer nut snapped in half

First I pulled the top half of the broken retainer nut out of the lower wash arm assembly. Then I took the was arm assembly off, removed the other half of the screw, set the lower spray arm seal into the lower wash arm assembly and screwed the wash arm retainer nut back in. As a bonus, I decided to replace the broken Wet agent cap. Had to use needle nose pliers to unscrew the broken bottom stuck in the well... That was the toughest part and it wasn't critical to the dishwasher functioning.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

61-68 of 68

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11741334
Manufacturer Part Number: WP3376846
Brand Model Number Description
Kenmore110773811Dishwasher
Kenmore110773812Dishwasher
Kenmore110773813Dishwasher
Kenmore110773881Dishwasher
Kenmore110773882Dishwasher
Kenmore110773883Dishwasher
Kenmore66513402K900Dishwasher
Kenmore66513402K901Dishwasher
Kenmore66513409K900Dishwasher
Kenmore66513409K901Dishwasher
Kenmore66513442K900Dishwasher
Kenmore66513442K901Dishwasher
Kenmore66513443K900Dishwasher
Kenmore66513443K901Dishwasher
Kenmore66513444K900Dishwasher
Kenmore66513444K901Dishwasher
Kenmore66513449K900Dishwasher
Kenmore66513449K901Dishwasher
Kenmore66513492K600Dishwasher
Kenmore66513499K600Dishwasher
Kenmore66513592K600Dishwasher
Kenmore66513593K600Dishwasher
Kenmore66513594K600Dishwasher
Kenmore66513599K600Dishwasher
Kenmore66513692K600Dishwasher
Kenmore66513699K600Dishwasher
Kenmore66515522000Dishwasher
Kenmore66515524000Dishwasher
Kenmore66515529000Dishwasher
Kenmore66515592790Dishwasher