This part is used as a safety device to protect the dishwasher circuit from overload. If the temperature gets to high it will shut off the electrical current to the heating unit in the appliance.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not drying dishes properly | Will Not Start
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Roper, Kenmore, Estate.
Part# WP3368928 replaces these:
3368928
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
November 13, 2017
Thermal fuse part number wp3368928. Where is it located on my Whirlpool dishwasher?
For model number DP840SWSX0
Hi Bob,
Thank you for your question. This part is located behind your kickplate at the bottom right hand corner of your appliance. I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
May 30, 2019
Where is this located and how do i test it ?The thermal fuse
For model number Du840cwdb4
Hello Tom, thank you for your question.This part is located on the underside of the unit on the right side. The access panel will have to be removed to access this part. Test the part with a multimeter for continuity. If it does not show continuity the part should be replaced. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Gregory
November 16, 2023
I tested this fuse for continuity and it is blown (No continuity). My dishwasher will run but will not heat. The switch on the front panel that switches from air dry to heat dry passes current when switched to heat dry so I assume it's good.The heating coil has continuity so I assume it's good also. What would cause this thermal fuse to blow? I would hate to replace it only to have it blow again.
For model number DU810DWGQ2
Hi Gregory, thank you for your inquiry. The most common reasons a dishwasher's thermal fuse blows are water leaks, damaged wires, power surges, defective temperature sensor, and loose connections. Damaged wires and loose connections are the most common reasons we would suggest checking them. The thermal fuse for your model is part number PS11741258. We hope this information is useful!
Was this helpful?
Thank you for voting!
Brian
February 1, 2019
Where is this part located on Amana dishwasher if at all it has one
For model number ADB1000AWB1
Hi Brian, Thank you for your question. This part is located behind your kickplate at the bottom right hand corner of your appliance. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
