Quick Question!

Have you ever purchased from PartSelect.com before?

11741243-1-S-Whirlpool-WP3364290-Timer Knob
11741243-1-S-Whirlpool-WP3364290-Timer Knob 11741243-2-S-Whirlpool-WP3364290-Timer Knob http://www.partselect.com/Schematics/Whirlpool/NIPS120P.gif

Timer Knob

PartSelect Number PS11741243

Note: This part has been updated by the manufacturer and now has metal threads.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Timer will not advance.

Compare At

$24.17

You Save

$4.03

Your Price

$20.14
Order within the next 7 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 27 reviews What's this?
1-15 of 27
 

28 of 32 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Joe from Covington, GA

Washer would not wash on "normal" cycle. Had to play with the knob to get it to run at all. Washer would not drain properly either.

I unplugged the washer from the electrical outlet.

I then removed the drain hose from the wall drain to allow me to turn the washer to gain access to the the back panel.

From the front, I then removed the plastic timer knob from the timer by unscrewing it. Then I pulled the plastic plate with the arrow on it to remove it. This exposed the screws that attached the timer to the control panel. I left them attached.

I then removed the two screws on the bottom of the front of the control panel (on each end) that attach the control panel to the washer.

I then went to the rear of the washer and removed the two screws on the top of the rear of the control panel.

I went back to the front and pulled the control panel forward and up to release it from the washer.

I then removed the two screws (that were under the plastic plate) that attached the timer to the panel and removed the timer from the panel.

Then I unplugged the wiring harness from the timer and removed the timer completely.

From there I reversed the procedure to install the new timer and knob.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 10 people found this instruction helpful

Parts Used:
  • Timer Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Francois from Oakley, CA

Broken timer knob

un-screw old knob with pliers. Hand spin on the new one. Your PartSelect. Is the BEST!!! I ordered on-line Sunday night.Got the part Wedesday!! FAST!!!!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 5 people found this instruction helpful

Parts Used:
  • Timer Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Carolyn from Albuquerque, NM

Broken timer knob

Removed remaining plastic piece of old broken knob by turning counter clockwise. Screwed on replacement knob by turning clockwise. Replacement knob is made of metal and I do not expect it to ever break. Soooo easy! Fast service and shipping!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 4 people found this instruction helpful

Parts Used:
  • Timer Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Carol from Springfield, OH

Knob broke off

Used pliers to take remaining broken plastic from post then screwed on new knob in 10 seconds. Easy as can be! I also loved the fact the new knob was made from metal where it threaded on instead of plastic like the original knob.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 3 people found this instruction helpful

Parts Used:
  • Timer Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: David from West Windsor, NJ

Original knob broke.

I used a pliers to remove the broken remains of the original knob. The new knob screwed on until it stopped. Good as new!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
  • Timer Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: REBECCA from MANCHESTER, CT

Knob was broken off on washer...so for over a year I was manually turning the metal rod with a pliers every time I washed clothes....until my son-in-law came upon your site! should have done it long ago! part arrived very quickly & simple installation! very happy & satisfied !

I simply took the knob out of it's packaging and screwed it on!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • Timer Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Kevin from Cincinnati, OH

Broken timer knob

I unscrewed the broken stem from the threaded timer stem; I was able to unscrew it with my fingers but could have used needle-nosed pliers. Once I removed the broken stem, I screwed the replacement timer knob into place. Total time for the repair was less than one minute and the replacement knob worked perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Timer Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Leslie from Jackson, TN

The old plastic knob just broke off

All I had to do was screw the new knob on. so easy!!!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Timer Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: herb from hollister, MO

The knobbusted off

i just popped on the knob and voila good as new

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Timer Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Myrna from Bellaire, MI

Broken dial on my washer

I spent 2 years using needle nose pliers and a glove to set and turn on my washer! Can you believe it!? Then I decided to see if I could find the part on line. There is was.. right here on this site! Today I put it on the washer and voila! ... like new! Easy and quick. Why did I wait so long!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Timer Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Diane from Merrimack, NH

Timer knob broke off

It was a snap. I read what others had done before I ordered the part and they were right! Unscrew the broken piece, screw the new knob on till tight and done.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Timer Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Nancy from Omaha, NE

Old timer knob broke off

Removed the remaining parts of the broken timer knob with pliers and just screwed on the new timer knob with no tools - just a quick turn of the knob until it was secure. Easy as it gets!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Timer Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Paul J from Hibbing, MN

Orignal know broke

Part was delivered in two days and the new one screwed on with no problem. Took longer to get new unit out of packing than to install

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Timer Knob
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: William from Murrells Inlet, SC

Inside of knob broke

Put on knob and turned untill tight.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Socket set
Customer: John from Lower Lake, CA

Broken timer knob washer would't spin

I first removed the agitator then laid the machine down to expose the motor and transmission. Then I removed the wires from the starting capacitor and motor. I then removed the hose from the pump. Then I removed the three bolts that hold the motor and transmission, seperated the motor from the transmission removed the worn out coupling and installed the new one. From tha point it is just a matter of reversing the steps. The washer is as good as new.

John

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-15 of 27