Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Whirlpool/UKYN1TLC.gif
See part 22 in the diagram
http://www.partselect.com/Schematics/Whirlpool/UKYN1TLC.gif

Lid Switch Kit

PartSelect Number PS11741201

Manufacturer Part Number WP3355806
Manufactured by Whirlpool

The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not drain.
  • Will Not Start.

Compare At

$47.87

You Save

$7.98

Your Price

$39.89
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 2 reviews What's this?
1-2 of 2
 

50 of 92 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers, Screw drivers, Wrench (Adjustable), Wrench set
Customer: Kenneth from El Paso, TX

Machine would stop when finished rinse cycle and wouldn't spin or drain.

I replaced the Lid Switch and the unit works fine. I also cleaned up some other issues in the unit which took about half the time.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Lid Switch Kit
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools:
Customer: Spa On Port Royal Sound from HILTON HEAD, SC

Washer stopped between wash and rinse cycle, and would not drain.

REMOVE THE PANEL BETWEEN THE DRYER (above) and washer (below) two 3/8" metal screws. Remove the panel in able to remove the top panel of the washer. remove the top panel of the washer by releasing two screws in rear of washer, pull cover to front , unplug old lid switch. Put top panel on flat surface upside down. replace lid switch and replace the panel and BOB'S YOUR UNCLE. It is a lot easier than it seems.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2