Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11741140
This filter collects lint as it passes through the dryer vent.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Ordered replacement lint filter. Took out the old one, and put in the new one. Voila! Very easy!!!
Help other customers find the most helpful instructions.
Were these instructions helpful?
My lint filter was torn up, and ordering a new one was really easy... I ordered, got it in very quickly, replaced it and continued on!
Simply removed old one and replaced with new one
Went online to find the lint trap for an older Maytag dryer - found one at Sear's Parts for $ 30.70 - then found the exact same part at PartsSelect for $ 9.00. Ordered from PartsSelect, received the replacement in just a couple of days and it works perfectly. Very happy with over all service.
I changed the drum rollers, belt, and belt pulley. The noise continued. I then replaced the blower fan. The problem was then fixed.
The key points to a complex repair:Unplug the power cord and don't touch the plug conductors.. it's 220 VOLTS!!! Also I use safety glasses, just a thought.Take the small cover off the back and make a drawing right on the back of the dryer or inside the cover of how the drive belt runs off the drum to the motor and around the idler pulley. When you put it back on don't put it around the back of the metal bracket. It goes between the bracket and the puley. When you get the front off and the drum out clean the lint out of the motor. The rollers go together dry no oil or grease. Don't leave the drive belt on the floor when you put the dryer back together. A wedge on the floor under the front panel will help lift it in place.Good luck. And don't put your hands in the dryer when it's running.
no-brainer, just took the other filter out and replaced it with the new one. perfect fit, and now there is no more lint blowing outside. the part arrived in only 3 or 4 days and was exactly like original, thanks to your web-site
I pulled the old lint filter out and put the new one in
i love your look up site. it is great. it is so easy to fine a part, pictures and all part numbers. great job.
jst droped the new filter in
Part Fit fine thank you
Our lint catcher broke at the top and was not allowing the front loading door to close. It could not have been the best use of efficiency either! I went online and found your site and ordered the part I needed. Most impressive, was that I received this small part within 2 days! Not sure why I waited so long to order the part - I could have saved myself a lot of aggrevation long ago. Thank you for your quick service!!!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.