Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11741055
This timer dial skirt is just over three inches in diameter. It is white in color and is made entirely of plastic. This skirt has a gray indicator triangle.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
I pried the middle knob (grey) from the old dial skirt with a butter knife. When the new dial skirt arrived I popped the old knob into the new dial skirt. There was a metal flange (?) on the timer stem and I pulled that off with small pliers and then installed the repaired knob. And WOW! - it worked
Help other customers find the most helpful instructions.
Were these instructions helpful?
You just needed to pull of the knob straight towards you.Then you separate the skirt from the knob and ring by pulling them off.You put the knob and ring onto the new timer dial skirt. Line up the skirt and push it back onto the timer arm. Still Part-select makes it easy to find a replacement part and gives good instruction on how to repair the problem.
called SEARS told part not available any longer. Would have to purchase new dryer. Also told part could not be ordered from MAYTAG due to age. Called PART SELECT and had new parts in four days. Put new knob on, Placed door lock in hole, JOB DONE (15 minutes) saved $ 500 to $600 on new one. Wayne
Pull off the nob/ timer dial skirt . Pop off the cap. Used pliers to pinch the catches together to release the knob from the timer dial skirt.Ordered new skirt from Part Select after confirming part from great diagrams and pictures.Received the timer dial skirt in a few days. Snap pieces back together and replace knob onto dryer.Super Easy.
Simply pushed the new part on the shaft. No tools necessary.
The part was ordered and we received it the very next day. It took less than 5 minutes to replace the knob. A service call would have been $75, plus the part. Ordering the part directly and installing it myself was easy. Total cost $10.
First I popped the timer dial cap off with a table knife. Next, I removed the grey middle section of the knob. This took a little muscle. The grey section and the timer dial cap popped easily onto the new Timer Dial Skirt, and it slipped onto the post. Works great!
Removed knob from broken skirt by pressing tabs and pulling off. Snapped Knob onto new timer dial skirt and pushed onto stem on dryer.
First, I removed the old parts, there are 3 parts to the dial that was broken, one of the pieces stripped and I only had to replace that part. After taking them apart, I used the new piece, the Timer Dial Skirt, and put the 3 pieces back together. Easy as pie. The only trouble that I had was when I received the new part the first time, it was broken also and I had to order another one, which they got to me right away. Although, they did make me pay for shipping the 2nd time around.They need to package them better, this was just placed loosely in a plastic baggie and the shipping company did not treat it well. Other than that, everything was very easy and quick.
Removed cap from knob with a knife - took skirt off remaining part by using fingers and put timer knob back together. Total time less than 2 minutes. Could have ordered the entire knob for 10 dollars, but the skirt was only four dollars. Either way the repair was trivial and very easy.
I watched the video two times, and it was so simple. I did exactly what the fix-it man told me to do, and presto. A dryer repair job for less than $12.00. And, it feels really good to do-it-yourself!Thankyou!
hey this was so easy that 6 year old could put the parts together..I loved this! No repairman and no going to an appliance store and getting frustrated.Easy as pie!
I pulled the dial off. Fit the three new parts together. I put in stem of the timer and turned the dryer on.Very easy, No tools required except a screw driver to pry the old knob off.
I removed the caps from the old timer dial, snapped them onto the new one and just pushed the dial onto the metal stem on the dryer. It took less than 5 mins. Very helpful staff.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.