Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11741039
This lint filter screen is of a slide in style type of Maytag filter screen. It is most typically used for the 08 and later series of Maytag gas or electric clothes dryers that appear before 1990.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Ordered part and replaced old filter when the part came. Very satisfied with process.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed old filters on 1975 coin op maytag dryer and replaced with the new ones. Simple repair (already cleaned the 4 dryers, that part took about 4 total hours. Tools reqd; 1/4 nut driver phillips driver) reminder to everyone turn off the power before servicing any appliance!
Removed old filter and put new one in x 4 no tools required to replace filters in 4 coin op dryers. Thank you
1. Thought I had a clogged duct or vent so I changed the duct. No clog, Problem continued. 2. Checked the heating element for damage, none noted. Quite a lot of lint under the dryer drum where the element was located so I cleaned the area. 3. Decided to replace the sensor that detects the dryness of the clothing, and while waiting for the part I was told by a friend to clean lint from the upper limit sensor mounted in the housing of the heating element. Cleaned upper limit sensor and replaced dryness sensor at the same time. Problem resolved. 4. Replaced Lint Filter to try and prevent lint build up.
I took out the old one and slipped in the new one. I was glad to know that it was so easy to find the piece I needed replaced. It was inexpensive and it came quickly.
just took the broken filter out and replaced it with the new one. perfect fit. it was not easy to find the replacement part, given the age of the dryer (15 yrs) but Part Select had it in stock and shipped it right away. Great service. will use again
Remove the two bottom screws that hold the front sheet metal on. Pull the bottom of the front out, while it pivots at the top -- it will drop free. Disconnect the two wires at the door closed switch. Put the front panel aside. Remove the four screws that hold the front drum retainer in place. Use a Dremel, or other suitable tool to remove the old rivets from the glides. Remove all of the old guide pieces. Install new, and use rivet tool to pop-rivet new guides in place. Re-assembly is the reverse of dis-assembly. The lint screen is a given. ;)
Replaced with new perfect match for old.
I removed the old lint filter and repaced it with the new one.
Found part no. on-line. Ordered part on line as it was less expensive with the shipping than the price at the local parts store.Came in two days with regular shipping. Just slid the old out and the new in.
Just slid the new one in the old ones slot. Norepair needed, just a replacement part.
Repair of course was simple, but very impressed by the speedy delivery. Filter fit perfectly and great price. Thank you partselect.
lifted out old filter and dropped in the new one - perfect fit. Happy camper!!
The belt was easy. I took the two screws off the bottom of the front panel. loosened the screws that held the front of the drum in place. Slipped the belt over the drum, fed it around the pulley from the rear access panel. DONE!! My parts arrived within two days. Everything went smooth. I'll be back for any and all future repair needs. THANKS!!
Ordered a new filter, it came in 2 days, I put it in the dryer an cranked it up!!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.