Quick Question!

Have you ever purchased from PartSelect.com before?

11740863-1-S-Whirlpool-WP3184533-Light Gasket
11740863-1-S-Whirlpool-WP3184533-Light Gasket 11740863-2-S-Whirlpool-WP3184533-Light Gasket http://www.partselect.com/Schematics/Whirlpool/JWYWENV9.gif

Light Gasket

PartSelect Number PS11740863

Manufacturer Part Number WP3184533
Manufactured by Whirlpool

This part creates a seal around the light lens and bulb.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$9.12

You Save

$1.52

Your Price

$7.60
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 3 reviews What's this?
1-3 of 3
 

9 of 10 people found this instruction helpful

Parts Used:
  • Light Gasket
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: David from Westminster, CO

Fiber gasket around pyrex light lens was mis-shaped

All I had to do was unscrew the pyrex lens over the oven light and then remove the old gasket and replace it with the new one. Worked like a champ!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Robert from Deming, WA

Accidently allowed the oven door to close without slowing it down. Result was a fractured inner door glass.

Removed the door just like you would do when cleaning the oven; I placed the door on a blanket on the kitchen table and carefully disassembled the door. There were more parts than I expected so keeping track of where everything went was important. I might add that without the use of my cordless variable speed drill motor removal of some of the screws would have been difficult. Adding the weight of the drill motor with sufficient push power I was able to tap the switch which "snapped" the screw loose. Don't think I could have done it with a hand type screw driver without stripping the head. Knowing your tools is very important.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 9 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: LOUIS from FREEPORT, TX

Oven light would not work, old bulb broken

Had already removed back covers and disconntedted power. When io received parts I replaced them in reverse oder I had removed them. Took me longer to replace back covers because of my bad diabetic hands. Thanks very much, yopu savbed me a bunch. God bless you and yours, god bless america.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3