Quick Question!

Have you ever purchased from PartSelect.com before?

11740775-1-S-Whirlpool-WP3148953-Infinite Switch - 8"
11740775-1-S-Whirlpool-WP3148953-Infinite Switch - 8" 11740775-2-S-Whirlpool-WP3148953-Infinite Switch - 8" 11740775-3-S-Whirlpool-WP3148953-Infinite Switch - 8" http://www.partselect.com/Schematics/Whirlpool/TTYLESFC.gif

Infinite Switch - 8"

PartSelect Number PS11740775

This switch controls the stove top surface burner.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, KENMORE®, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Element will not heat.

Compare At


You Save


Your Price

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 1 reviews What's this?
1-1 of 1

53 of 58 people found this instruction helpful

Parts Used:
  • Infinite Switch - 8"
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: RON from KAUFMAN, TX

The burner would keep heating after turning off the switch

Start by turning off the power to the range.
It was fairly easy to take the "Control Deck" off the top of the range by removing about 8 screws. I leaned the deck forward without removing any wires except a green ground that was held on by one of the screws.
There are two small screws under the switch knob holding the Infinite Switch to the panel. I removed these and let the switch hang on the wires. To avoid missplacing or crossing the wires... I moved one wire at a time to the new switch, then attached the switch to the panel and put it all back together.
Whole job was done in about 15 minutes

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1