Quick Question!

Have you ever purchased from PartSelect.com before?

11740774-1-S-Whirlpool-WP3148952-Switch, Infinite (Right Rear)
11740774-1-S-Whirlpool-WP3148952-Switch, Infinite (Right Rear) 11740774-2-S-Whirlpool-WP3148952-Switch, Infinite (Right Rear) 11740774-3-S-Whirlpool-WP3148952-Switch, Infinite (Right Rear) http://www.partselect.com/Schematics/Maytag/FLT7SHUW.gif

Switch, Infinite (Right Rear)

PartSelect Number PS11740774

This part carries 5.2-6.6 amps.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, KENMORE®, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Element will not heat.

Compare At

$50.41

You Save

$8.40

Your Price

$42.01
Order within the next 1 hr and 53 mins and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 3 reviews What's this?
1-3 of 3
 

20 of 25 people found this instruction helpful

Parts Used:
  • Switch, Infinite (Right Rear)
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Mikhail from Iowa City, IA

One of the heat elements in my oven would not heat

1. Disconnected power from my oven.
2. Removed several screws that held the control block
3. Removed two screws that held the switch itself disconnected wires and removed switch
4. Reconnected all wires to new switch (no soldiering gun required)
5. Put control block back

Overall - very easy

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 4 people found this instruction helpful

Parts Used:
  • Switch, Infinite (Right Rear)
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Richard from CONCORD, NH

The burner would not shut off.

Pulled the dial off, unscrew two screws. Pull the switch out from the back. Disconnect the wires from the old switch and connect to the new switch one by one. Set the new switch in place. Sctew the two screws in to hold the switch in place. Push on the dial.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 9 people found this instruction helpful

Parts Used:
  • Switch, Infinite (Right Rear)
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: paul from windsor, VA

Water pump went out

it was very easy i took the pump off only two clips and two hoses holding it type in the model number at parts select it came right up soi new it right one from the picture got with in 3 days put it back on less then 10 mins

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3