Quick Question!

Have you ever purchased from PartSelect.com before?

11740712-1-S-Whirlpool-WP31001449-3-Position Selector Switch
11740712-1-S-Whirlpool-WP31001449-3-Position Selector Switch 11740712-2-S-Whirlpool-WP31001449-3-Position Selector Switch 11740712-3-S-Whirlpool-WP31001449-3-Position Selector Switch http://www.partselect.com/Schematics/Maytag/55874.gif

3-Position Selector Switch

PartSelect Number PS11740712

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.
  • No heat or not enough heat.

Compare At


You Save


Your Price

Order within the next 5 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 1 reviews What's this?
1-1 of 1

10 of 25 people found this instruction helpful

Parts Used:
  • 3-Position Selector Switch
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: David from Crossroads, TN

Dryer heater element intermittent.

First I unplugged the dryer. Then I removed the screws that hold the contol panel front on. Pulled up the control panel up and forward and layed it on the top of the dryer face down. (After pulling off the knob.) I removed one screw that holds the mounting plate in position. Then I removed another screw that holds the Switch onto the mount plate.

I pulled off the bad switch and put the new one in place. Put the screws back in. I had to cut about 2 inches of burnt wire back and replace the connector.

Hooked up the wires and put the control panel back in place. Put the screws in, plugged in the dryer and we are back in business.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1