Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11740708
Also known as the mounting clip. Holds the door switch in place on your appliance.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
1. Removed wires to switch2. Lifted top panel of Dryer with a screw driver3. removed two inside screws holding the from panel against the drum.4. Dropped front panel on the floor and removed door switch.5. While the door was out, I removed the lint panel attached to the door - two screws.6. Cleaned the door panel with a vaccum cleaner7. replaced lint panel onto door with two screws8. replaced door switch to the front panel9. placed front panel on to the from of dryer with two screws.10. Connected wires onto the door switch.11. Closed top dryer panel and them pressed hard to catch on to metal clips.12. Attached Dryer cable to electrical outlet13. Trurned Dryer on and open door as it tumbled to confirm it would stop.14. Done
Help other customers find the most helpful instructions.
Were these instructions helpful?
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.