11740701-1-M-Whirlpool-WP308685-Cover Screw
Part Location Diagram of WP308685 Whirlpool Cover Screw
See part 22 in the diagram
( Grid squares measure 1x1 inch )
11740701-1-S-Whirlpool-WP308685-Cover Screw 11740701-2-S-Whirlpool-WP308685-Cover Screw Part Location Diagram of WP308685 Whirlpool Cover Screw
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Cover Screw WP308685

 Fits your EH070FXAN00!

Rated by 3 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 7.95
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your EH070FXAN00!
PartSelect Number PS11740701
Manufacturer Part Number WP308685
Manufactured by Whirlpool
Product Description

Cover Screw Specifications

Sold individually.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Dryer, Dishwasher, Washer, Refrigerator.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Maytag.
Part# WP308685 replaces these:
AP6007584, 01-36-695, 1-80306-104, 125591, 14-33-180-02, 14-41-510, 145193, 161895, 161897, 19-08-027, 20-02-583-02, 245760, 25-7001, 25-7458, 25-7818, 253549, 255606, 260646, 308685, 309234 , 31001041, 3182346, 3357011, 3367670, 3393008, 35-01-688, 35-01-728, 4157111, 4157117, 4315391, 4315576, 4320407, 4320460, 4320498, 4323379, 4323775, 4335117, 4351389, 4355457, 4355585, 4362970, 4362972, 4362976, 4381601, 4389528, 4389529, 4389530, 4389531, 4389535, 455524, 487094, 487100, 487361, 487683, 487942, 488247, 488258, 488344, 488382, 488720, 488809, 488861, 488941, 488968, 488969, 488970, 488971, 488972, 50-01-155, 595152, 613128, 615532, 680331, 680775, 680983, 681100, 681233, 681483, 695553, 786757, 797176, 797499, 797767, 8190526, 865056, 866724, 866914, 9414722, 9416643, 98518, Y31001041 Show less
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Relocating dishwasher into the new kitchen layout
In this case the dishwasher had already been installed for a few years. After removing it, we inspected it and saw it needed a bit of TLC. The transport wheels on the back were missing, making it harder to move around without scratching the tile and some of the original hardware was rusted or broken off. I looked up the parts easily here on PartsSelect using their parts breakdown diagrams and was glad to see what I needed was still available. We had a licensed plumber relocate the hot water line and drain for us to make things a bit easier.
A licensed electrician had also moved the power line over to the new location and left a wire sticking out of the bottom of the wall to hardwire the dishwasher in again. We decided to convert the dishwasher to be able to be plugged into a standard 20amp wall outlet instead. We had already purchased a kit with a nice long cord and strain-relief snap on plastic fitting that snapped onto the metal incoming power box on the bottom front of the dishwasher. Using the supplied wire nuts, etc., we connected the wires and ground wire to the proper wires from the dishwasher and ground lug. We put the dishwasher aside and then went to work on converting the power wire coming out of the bottom of the wall, to a conventional outlet. I am mentioning all this because in our first attempt we unfortunately put the receptacle a bit high off the floor and the new power cord plug end, stuck out and hit the back of the dishwasher so it would not go all the way in and was sticking out from under the counter top. I tried using one of those flat adapter cables, but even that still stuck out to far. So we ended up relocating the outlet box as low as we could on the wall and this allowed the plug to stick out into the opening area at the bottom rear area of the dishwasher so it could now be slid all the way in under the kitchen counter properly. I hope that bit of trial and error will save you some time if you ever decide to go the pluggable route too.
The new installation required the use of the dishwasher side mount brackets, so we had to purchase a replacement set of those, complete with the hardware to screw them down.

This project took a bit longer than planned due to the power plug problem, one which we will remember for any other similar appliance relocation projects, as well as the time to get our new parts in that we had to order, but other than that the rest went smoothly and the dishwasher was relocated successfully.
Read less
Other Parts Used:
Screw Dishwasher Transport Wheel Cover Screw Retainer Screw - 8-18 x 1/2
  • Curtis from PALM BAY, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Kenmore 80 Series Washer - Agitator Stopped Working
First I screamed at the ceiling, because I have a three year old and an infant, and the washing machine was dead. Then I went to youtube. It seemed like the "agitator dogs" were the issue.

In this spirit of any repair, I replaced them, and it was not the issue. I don't know what I expected.

Ceiling. YouTube. Pacing.

Then I figured it was this part - the motor coupling. I unplugged the machine and took out the drain tube. I leaned the machine back and propped it up with an empty detergent bottle, because those were abundant. Ratchet off a few bolts and the motor comes out. The coupling was indeed broken. The new one slips right in - I tapped it a few times with a mallet for good measure / vengeance. Ratcheted the bolts back on and tipped it back up.

Pros: Washer works now.
Cons: Everest-esque laundry pile to address.

But hey, it worked! I am no handyman and it wasn't too bad at all. Half hour tops.
Read less
Other Parts Used:
Cover Screw Direct Drive Motor Coupling
  • Peter from WRENTHAM, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher door fell open rapidly
removed screws thet secure it to counter..pulled out dishwaser as allowable by connections replaced the part using pliers to pull back the door spring....replaced the dishwasher in place..fastened the counter screws..easy!
Other Parts Used:
Door Balance Link Kit Mounting Bracket Cover Screw
  • John from Farmingdale, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
79 of 485 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
June 25, 2019
Top arms don’t spin at all, bottom spray arms spin, but seemingly very slowly. I’ve checked for blockages in the channel leading from bottom arm to top & all clear. What is most likely the problem?
For model number KUDS50FVSS3
PartSelect logo
Hello Tim, Thank you for the question. This is most likely causes by a defective Circulation Pump Motor, PartSelect Number PS11750859. This pump circulates the water up into the arms causing them to spin. If the pump is not pumping the top arms will not spin and the bottom will not have enough water pressure to spin at the proper rate. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Circulation Pump Motor
$260.81

  In Stock
Robert
March 24, 2023
What part number for the 2 screws that secure the dishwasher to the counter.
For model number ADB1400AGS3
PartSelect logo
Hi Robert, thank you for your inquiry. According to our research, the part you are looking for is part number PS11740701. Let us know if you have further questions!

Was this helpful?
Thank you for voting!
  • 1
Back to Top
You May Also Need ?
Mounting Bracket
$10.04
$10.04
  In Stock
Outlet Screen Door Grille
$27.90
$27.90
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11740701
Manufacturer Part Number: WP308685
Brand
Model Number
Description
Kenmore
0116387363
Range - Kenmore Range/Stove/Oven Model 011.6387363 (0116387363, 011 6387363) Parts
Kenmore
1039567811
Range - Kenmore Range/Stove/Oven Model 103.9567811 (1039567811, 103 9567811) Parts
Kenmore
10635705591
Air Conditioner
Kenmore
10635710591
Air Conditioner
Kenmore
10635712591
Air Conditioner
Kenmore
106508802
Dryer - Kenmore Dryer Model 106.508802 (106508802, 106 508802) Parts
Kenmore
1065928100
Freezer
Kenmore
1066021100
Freezer
Kenmore
1066021101
Freezer
Kenmore
1066023120
Freezer
Kenmore
1066025120
Freezer
Kenmore
1066025121
Freezer
Kenmore
1066025160
Freezer
Kenmore
1066025161
Freezer
Kenmore
1066025200
Freezer
Kenmore
1066025201
Freezer
Kenmore
1066121100
Freezer
Kenmore
1066123170
Freezer
Kenmore
1066123210
Freezer
Kenmore
1066125160
Freezer
Kenmore
1066221100
Freezer
Kenmore
1066221101
Freezer
Kenmore
106622150
Freezer
Kenmore
1066222170
Freezer
Kenmore
1066222171
Freezer
Kenmore
1066222172
Freezer
Kenmore
1066222173
Freezer
Kenmore
1066223120
Freezer
Kenmore
1066223170
Freezer
Kenmore
1066225120
Freezer
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Cover Screw
$ 7.95
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.