Quick Question!

Have you ever purchased from PartSelect.com before?

11740648-1-S-Whirlpool-WP303650-Water Inlet Valve
11740648-1-S-Whirlpool-WP303650-Water Inlet Valve 11740648-2-S-Whirlpool-WP303650-Water Inlet Valve 11740648-3-S-Whirlpool-WP303650-Water Inlet Valve http://www.partselect.com/Schematics/Whirlpool/GMFCTIFO.gif

Water Inlet Valve

PartSelect Number PS11740648

This water inlet valve is intended for use with under counter style dishwashers. It has a 3/8 of an inch FPT (female pipe thread) valve and a mounting bracket. - This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not fill with water.
  • Leaking.

Compare At

$59.98

You Save

$10.00

Your Price

$49.98
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 2 reviews What's this?
1-2 of 2
 

17 of 20 people found this instruction helpful

Parts Used:
  • Water Inlet Valve
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Wrench set
Customer: Jack from Fort Worth, TX

Leaky water inlet valve

Easy. Removed screws at top holding dishwasher to counter. Turned off water to dishwasher. Unhooked water supply line. Electrical and waste lines were long enough to leave connected and pull dishwasher out, set on side. Pull off electrical connector. Use pliars to compress spring holding water line to dishwasher, remove that line from valve. Use nut driver to remove old one, and replace with new one. Teflon tape on water connection to sink. Do everything in reverse.
done.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

13 of 38 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Socket set, Wrench set
Customer: Kathy from Kennedy, AL

Dishwasher had no water coming into the bottom of it

Took the old one off and replaced it with the new one we received from you. It was great because we received the part just in time to do the Thanksgiving dishes! Thanks PartSelect.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2