Quick Question!

Have you ever purchased from PartSelect.com before?

11740626-1-S-Whirlpool-WP3-60336-001-Evaporator Fan Motor
11740626-1-S-Whirlpool-WP3-60336-001-Evaporator Fan Motor 11740626-2-S-Whirlpool-WP3-60336-001-Evaporator Fan Motor 11740626-3-S-Whirlpool-WP3-60336-001-Evaporator Fan Motor http://www.partselect.com/Schematics/Maytag/59719.gif

Evaporator Fan Motor

PartSelect Number PS11740626

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Noisy.
  • Too warm.

Compare At

$152.68

You Save

$25.45

Your Price

$127.23
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.5 / 5.0, 2 reviews What's this?
1-2 of 2
 

45 of 50 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: James L. from Madison, AL

Froze over fan motor burnt out

Removed shelves from inside freezer then removed 4 screws holding cover panel. Pulled panel up and slightly pulled forward to remove. Removed wiring connections then removed two screws that held the motor & fan assembly. Removed the support bracket from the old motor and installed same on the support bracket. Reversed removal procedures for installation. Cover panel is a little bit of a problem when trying to reinstall. Put in panel as high as you can and then slide down. You must then exert a little pressure on the bottom portion to get it to seat correctly. Install four remaing screws and you are done. I had this repaired previously by a professional repairman and noticed from the pictures you folks provided that he had installed the screws on the support bracket incorrectly. That was the reason for the fan blade to rip apart.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

24 of 28 people found this instruction helpful

Parts Used:
  • Evaporator Fan Motor
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Murray from Terrebonne, OR

Evaporator fan did not run

The first thing I observed was the bolts that attach the motor to the mounting bracket were installed backwards at the factory. This caused the fan to catch on the bolt ends which resulted in the motor burning up. When I installed the new motor, I reversed the bolt direction. There is no way the fan will catch. The freezer works great !

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2