Quick Question!

Have you ever purchased from PartSelect.com before?

11740550-1-S-Whirlpool-WP25-7941-RING-O
11740550-1-S-Whirlpool-WP25-7941-RING-O 11740550-2-S-Whirlpool-WP25-7941-RING-O http://www.partselect.com/Schematics/Maytag/58084.gif

RING-O

PartSelect Number PS11740550

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Leaking.
  • Noisy.

Compare At

$5.87

You Save

$.98

Your Price

$4.89
Order within the next 6 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.5 / 5.0, 2 reviews What's this?
1-2 of 2
 

16 of 24 people found this instruction helpful

Parts Used:
Level of Difficulty: Difficult
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Customer: Kevin from Houston, TX

Washer leaked water on the floor. Seal nut assembly rubber and o-ring were worn out.

Overall, this repair should have been quite easy. The problem was removal of the old seal nut assembly. It was a bear to remove, and ultimately I had to surgically remove it from the washer in pieces. Unfortunately I broke the outer tub (plastic) in the process of getting the nut off. Once I had the silly plastic nut off, and the tub repaired the balance of the repair was absolutely easy.

My summary: This repair is really easy IF the plastic seal nut assembly comes off easily. If it doesn't budget easily, go ahead and chip it apart to get it off, being careful not to damage the threaded part of the agitator shaft. The new one will completely replace the chipped away nut.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

47 of 137 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Customer: Kevin from Lincoln, NC

The washing machine was losing grease into the drum and on our clothes

Opened the top of the washing machine, removed the two screws and the front cover removed the agitater, drum and outer tub. replaced the bearing and seals and reassembled.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2