Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11740346
This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
I unplugged the power cord. Then, I removed the housing at the inside-top of the refrigerator by removing the two screws that hold it in place. This exposed the defrost timer. I removed two clips that hold the timer in pace. Then unplugged and removed the old timer, and plugged-in and secured the new timer. Then, screwed the housing back to the top of the refrigerator. Just be careful, I partially broke the tops off the two pins that slide through the timer's body (when attempting to removed the clips that sit on the pins). Not a big deal, as the timer will remain in place without the top of the pins. Next time, I would cut the clips using diagonal cutters.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Disconnect power cord from power outlet. Remove 2 screws holding control panel in place. Swing panel down to access timer. Remove 4 wires from timer. Remove 2 clips from timer bracket. Remove & replace defrost timer. Re-install clips. Re-connect wires. Swing panel up and install 2 screws. Plug in power cord, cycle & test operation.
we just took it apart defrosted it and inserted the part timer and that was it
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.