Quick Question!

Have you ever purchased from PartSelect.com before?

11740011-1-S-Whirlpool-WP2266802-Switch, Power Disconnect
11740011-1-S-Whirlpool-WP2266802-Switch, Power Disconnect 11740011-2-S-Whirlpool-WP2266802-Switch, Power Disconnect 11740011-3-S-Whirlpool-WP2266802-Switch, Power Disconnect http://www.partselect.com/Schematics/Maytag/IHCQUH9M.gif

Switch, Power Disconnect

PartSelect Number PS11740011

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.

Compare At

$51.98

You Save

$8.66

Your Price

$43.32
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 2 reviews What's this?
1-2 of 2
 

10 of 12 people found this instruction helpful

Parts Used:
  • Switch, Power Disconnect
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers
Customer: Roy from Ann Arbor, MI

Switch went bad

Our unit is a built-in unit so first had to remove the decorative cover panel to expose the internal on/off switch. Turned off the circuit breaker. Disconnected the wires (simple pull-off/push-on). Removed the old switch which meant clipping the plastic tabs holding the switch in position. Inserted the new switch by simply pushing it through the opening being sure to have it in the same alignment ('off' to the back of the unit.) Reconnected the wires making sure to have a white ground wires on the left and the black 'hot' wires on the right. Turned the circuit breaker back on. Turned the switch on. Now it runs.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 5 people found this instruction helpful

Parts Used:
  • Switch, Power Disconnect
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Robert from Richmond, TX

Switch burnt out

Unpluged the refrigerator, removed the burnt out switch by unpluging it, plugged the new one in re installed the switch into cover. Plugged in refrigerator replaced cover. Done. Easy as one two three

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2