Quick Question!

Have you ever purchased from PartSelect.com before?

11739985-1-S-Whirlpool-WP2262185-Push-On Start Relay
11739985-1-S-Whirlpool-WP2262185-Push-On Start Relay 11739985-2-S-Whirlpool-WP2262185-Push-On Start Relay 11739985-3-S-Whirlpool-WP2262185-Push-On Start Relay http://www.partselect.com/Schematics/Maytag/J36BTANN.gif

Push-On Start Relay

Compare At

$50.50

You Save

$8.42

Your Price

$42.08
Order within the next 20 mins and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11739985
Manufacturer Part Number WP2262185
Manufactured by Whirlpool

This is a push-on start relay for your refrigerator. It attaches to the compressor and starts it by briefly boosting it. It will then shut off as soon as the motor is up to the required speed. You may need a new relay if your appliance is too warm or will not start. The tools you will need to make this repair include a flat-blade screwdriver and a pair of needle-nose pliers. This start relay measures to be just over one square inch.

This part works with the following brands: Whirlpool, Kenmore, KitchenAid, Maytag, Roper, Crosley, Inglis, Estate, Jenn-Air, Amana, Magic Chef, Admiral, International.

This part works with the following products: Refrigerator, Range.

This part fixes the following symptoms:

  • Will Not Start.
  • Fridge too warm.
  • Freezer section too warm.
  • Clicking sound.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.7 / 5.0, 9 reviews What's this?
1-9 of 9
 

74 of 85 people found this instruction helpful

Parts Used:
Level of Difficulty: Difficult
Time to do repair: 15 - 30 mins
Tools:
Customer: Michael from Carlisle, PA

Refrigerator would not cool, start relay was shot.

I ordered the three parts from the diagram for my model. The new relay was not at all similar to the old one (3 connections instead of 2, new cover. Seareching for about an hour on the web I found some blogs that helped. In case anyone else asks, here is the answer. The old relay had two connections - white wire to one and 2 orange wires to the other. The new relay had three connnection - they are numbered on the relay, attach as follows - White to #3, orange from capacitor to #2, orange from harness to #1. Blue stays with overload. I am surprised that the so-called experts had no idea what to do, but a simple homeowner was able to figure it out!! Fridge works perfectly now..

Help other customers find the most helpful instructions.

Were these instructions helpful?   

42 of 52 people found this instruction helpful

Parts Used:
  • Push-On Start Relay
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Roger from Bethesda, MD

Refrigerator stopped cooling, otherwise fine

Well first of all, I was afraid that the compressor was shot and I'd need a whole new refrigerator (ack $1000!!!). After googling/reading, I figured out that the starter relay mounted on the compressor was burned out. (loud click as thermal cutout shuts down compressor.) So, I ordered a replacement part, overnight shipping. Unfortunately, this was on a Friday night, so I had to figure out how to keep the fridge cold all weekend (til Tuesday). I'd already moved frozen stuff to a chest freezer, but the inside of the fridge compartment was now nearly warm at this point, so I got 10 lb of dry ice. That got things cooled down initially. Well, turns out that with a short piece of wire, you can momentarily jump across the terminals of the relay and kick start the compressor. It then runs until either the defrost cycle stops it or the thermostat kicks it off. Anyway, all weekend, every six hours or so, I turned off the fridge for a minute to cool down the overheated, stalled compressor, then turned it on and jumped the terminals to start it up. Kind of a pain, but saved lots of food. Overall, the $30+$30 (shipping) for the part saved me from having to get a new refrigerator, so I'm quite pleased. I've used Part Select many times now. Very fast service and shipping, great website/database. I shop around and every time end up buying from them again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

36 of 47 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers, Wrench (Adjustable)
Customer: ELTON from WAXAHACHIE, TX

Both sides would't get cold

Wasn't sure which switch was bad so I ordered all three. Thought maybe compressor was bad, but it was the overload. I removed plastic cover on compressor, unplugged wires and slid overload off of prongs (pins) attached to the compressor. Same with the second switch, both are attached to the compressor. Saved buying a new fridge for $1400. 00. Easy , cheap job!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

20 of 26 people found this instruction helpful

Parts Used:
  • Push-On Start Relay
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: kelly from glen allen, VA

Refrigerator stop cooling

I was about to waste $1000 on buying a Refrigerator. Took 1 mins to search on google "Refrigerator doesn't work". Found a video on youtube, showed a step and step video to solve my problem. Order the part $50 and it took me less then 5 mins to install it. =)

Help other customers find the most helpful instructions.

Were these instructions helpful?   

13 of 17 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Mansoor from Westbury, NY

Refigrator was not coolling

Pull the refigrator out, unscrew the back plate and the pull the relay & overload out; and put the new one in. It was that simple. The video actually helped me a lot too.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

11 of 11 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Terry from Knoxville, TN

Compressor not working

Extremely easy install. Just popped off the cover located on the side of the compressor. Noted placement of the wires on the overload and relay. Took a small screwdriver to slide both from the electrical pins on the compressor...take care doing this. Unplugged the wires, plugged the new components to the wires and installed to the compressor. Plugged in the frig and the compressor came on. Not sure why these went out to begin with but the fix was extremely easy and saved me the expense of a repair man.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

13 of 25 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Steven from Mobile, AL

Stopped running

replaced overload, but the start relay looked different, and wasn't sure how to replace it.Unit is now running

Help other customers find the most helpful instructions.

Were these instructions helpful?   

9 of 16 people found this instruction helpful

Parts Used:
  • Push-On Start Relay
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: danny from adelanto, CA

Fridge ouit cooling

where the wires crossed at the start relay, 20 years of vibration allowed them to short out and burn out the start relay ..since i have 2 identical fridges i switched the run capacitor to determine it was'nt bad too...ordered a start relay wednesday nite and got it friday morning...cold fridge by noon...good service and the part was exactly the same as the original....

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Judy from E GALESBURG, IL

Was not staying cool

removed old parts checked connections replaced parts did not fix problem

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-9 of 9

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11739985
Manufacturer Part Number: WP2262185
Brand Model Number Description
Kenmore10641262800Refrigerator
Kenmore10641263800Refrigerator
Kenmore10641264800Refrigerator
Kenmore10641269800Refrigerator
Kenmore10641562800Refrigerator
Kenmore10641563800Refrigerator
Kenmore10641564800Refrigerator
Kenmore10641569800Refrigerator
Kenmore10644073600Refrigerator
Kenmore10644102300Refrigerator
Kenmore10644103300Refrigerator
Kenmore10644109300Refrigerator
Kenmore10644252400Refrigerator
Kenmore10644252401Refrigerator
Kenmore10644253400Refrigerator
Kenmore10644253401Refrigerator
Kenmore10644254400Refrigerator
Kenmore10644254401Refrigerator
Kenmore10644259401Refrigerator
Kenmore10644262600Refrigerator
Kenmore10644263600Refrigerator
Kenmore10644264600Refrigerator
Kenmore10644269600Refrigerator
Kenmore10644273600Refrigerator
Kenmore10644552400Refrigerator
Kenmore10644552401Refrigerator
Kenmore10644553401Refrigerator
Kenmore10644554401Refrigerator
Kenmore10644559400Refrigerator
Kenmore10644559401Refrigerator