Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11739924
This kit no longer includes the connectors. It is only the tubing/water reservoir.
Note: This tubing requires an adapter coupler (PS369735) to take the tubing from 1/4 inch to 5/16 inch.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
The repair was incredibly easy - 1. Turn off the water at the water line for the fridge2. Disconnect the pressure fittings for both lines running to the resevoir.3. Remove the old resevoir4. Install the new resevoir and run the lines back to the orginal fittings.5. Reconnect the fittings, turn on water.6. Drink water!
Help other customers find the most helpful instructions.
Were these instructions helpful?
First the small screws you sent did not fit.I had to cut and mend the old ones (2) to use them.I did purchase a connecting valve tha I used to connect the part of tubing (my name for it) from old one to new one.I was surprides it is working fine.Not bad for a nurse!
It did not go at all as yet. I requested instructions and have not yet heard back from you. I do not know how the part you sent will attach. There were no instructions...updated ....The tubes leading to the original Reservoir had to be cut.It was not possible to release the tubing from the original reservoir.There also were not any instructions on how the connections needed to be attached. It took a while to figure it all out.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.