Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11739794
This part can be used for either the left or right side of the pan.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
We finally found you online and ordered the parts, the drawer moves nicely, but seems not to fit across, not wide enought maybe. My husband took off the old slides and installed the new ones, a screwdriver helped him push a little and everything snapped into place.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed old ones and repalced wiht new ones bought here
We seem to place heavy things in this draw. This is the second time we have changed the sliders. Its really easy. Now I keep it to lighter foods.
Part arrived in two days. Put part on. It's been heaven ever since.
The parts arrived quickly and were an exact match to the originals. Advise. Remove the shelf with the broken tracks and let warm to room temperature. The plastic is more pliable and it's easier to get the old ones off. Just push in and slide the lug to the matching opening to remove. Before you try to install the new ones, lubricate the lugs (blocks) with vegitable oil or vasiline etc. It will make the new parts slide in with little effort. double check to make sure the lugs lock into place before reinstalling the shelf.
Lightly tapped end of broken rail with rubber mallet to take the rail off. Again, aligned new rail and lightly tapped into place. Done in 5 minutes.
After removing the shelf from the refrigerator, I had to give the track a little gentle persuasion to get it out. Once out, it was only a matter of placing the new part, and returning the shelf to it's proper place. It was literally less than 5 minutes to do the entire repair (including the removal & replacement of items on the shelf).
Snapped the old tracks out and snapped the new tracks in place.
I removed the shelf, popped off the old brackets and popped on the new ones. Easy once I figured out exactly how to do it. Less than 5 minutes later it was repaired. Easy!
Had to use sand paper as the slider as it would not go on all the way. After sanding the plastic down a bit, it took the excess off and slid on just fine. Every thing works as it should.
... probably from overloading the drawer. Used a rubber mallet to tap the old tracks out and the new ones into place. About 5 minutes total, and I am NOT a "handyman"!
I removed the drawer and shelf from the fridge, then snapped one broken track out. I had to gently pry the track near the middle with a screwdriver to pull out the one small circular tab then the track slid right out. Thankfully I had read some other customer's instructions first so I was not surprised to see the new part had two other small circular tabs that kept it from fitting that I had to file off before snapping the new track in place. I repeated with the other side. It was super easy, I spent more time looking for the file than actually doing the repair! The other reviews were really helpful, without that I would have been more nervous about filing the tabs off the new parts.
Watched video first. Very simple removal and replacement.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.