Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Lexie H - January 20, 2021
Verified Purchase
Worked Perfectly!!!
For almost two years, I lived with an agitator that had a big chip out of it and every wash, clothes would get wrapped so tightly around it that I could barely untangle them. I feel like I have a new washing machine! The part was an exact match, was easy to install and is perfect! No more tangled wet clothes!!
★★★★★
★★★★★
John S - December 28, 2018
Verified Purchase
easy repair
the part worked great and my washer is operational
★★★★★
★★★★★
Ashley L - March 8, 2018
Verified Purchase
Home repair of broken Maytag washer agitator
Part matched the OEM part exactly. I'd originally ordered the part through Amazon but received a part that didn't fit. Received the part I needed at a fair price. Exactly what I'd expect. If I need another appliance part I'll be back.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 12 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
broken agitator
very easy replacement. was probably broken for a year and only took five minutes to replace. Can't believe we waited so long!
emily from waco, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not agitate
Remover agitator/Auger assembly. Install new agitator/auger assembly. Washer still would not agitate. Called repairman and found the transmission was bad. Fortunately transmission was still under warranty. 10 year warranty on transmission.
Gerald from Spring, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Socket set
14 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Finn broke on the agitator/auger
Pop the cap off the agitator/auger no tools needed. Once removed select a socket and a socket exstension. remove the screw amd pull off the part. Make sure to save the washer that may be still attached to the inside of the agitator. install the new agitator using the existing screw and washer. Takes about 15 minutes.
Michael from Lyndhurst, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Auger top would hit the top lid
The replacement was very easy, just one bolt and RR was a snap. However, the first part that came was defective and I called the 800 number, spoke to the rep and the part came the next day. Excellent customer service, and would do business again
Robert from Suisun City, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old agitator broke
Removed old agitator, and installed new one. Very easy.
I popped off the fabric softener on top of the agitator. Used an extended arm on my socket set to remove the only nut holding the agitator on the motor assembly apparatus. The agitator came off with ease. Just reversed the procedure in replacing the new agitator. This was an easy job.
Frank from Bethel Park, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
5 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer agitator fins snapped off
I first took the fabric softener dispenser off and used a ratchet wrench to take the nut off. I then removed the agitator, put the new one on and reversed the process. It was extremely easy!
Paul from ATLANTIC HIGHLANDS, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set, Wrench (Adjustable)
6 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Auger was broken
Needed a medium extension and a rachet a screw driver and a 13mm socket. I used a short screw driver and inserted in it the softer container and lifted it strait up to get the softner container out of the way. I used the medium extension to reach in the auger and loosen the small bolt holding the auger on the machine. Pulled it up and o
... Read moreut. Reversed the above procedure and it was set to go. Total time about 8 to 10 minutes. Thank for all the help Kudos to all including Susan W.
Read less
Charles F from Brooklyn, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken fins on agitator.
I went ot the Parts Select web site, and read what other people had done with the same problem. The advice was right on. Using the paper towel to hold the screw in place during reassembly ws great advice. Thanks for the heads- up.
John from Douglassville, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The auger section of this part would no longer stay attached to the lower agitator part due to prior repair work
Use a blade to pop off the fabric softener dispenser cup. Use socket and extension to unscrew the single hex bolt that attaches the assembly to the shaft. Lift off the assembly and recover the flat washer. Install the new assembly over the shaft and install the original hex bolt and washer. Tighten firmly. Snap the dispenser cup back
... Read more in place.
Read less
John from Ava, MO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rebecca
April 18, 2018
The top part of my agitator spins all the way around when washing it doesn't do a back and forth motion what could be wrong? The bottom part I can't move when the washer is off so I know its not the transmission. Could it be the directional cog? Or something else?
For model number MAV5000AWW
Hi Rebecca, Thank you for the question. This model does not have cogs, so I suggest replacing the Agitator assembly, Part Number: PS11739488. Sounds like there is something damaged inside the top part of the agitator. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
August 26, 2017
My washer shakes way too much in spin cycle,one agatater fin has broke off
For model number sav5710aww
Hi James,
Thank you for your inquiry. If one of the agitator fins has broken off, you will need to replace it. The part number for it is PS11739488. If your washer is shaking and moving the agitator is one part that will fix the issue. Some other parts that you may have to look at are the levelling legs, the rubber foot pads, the brake pads, the belt, the friction rings and the springs. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
March 11, 2018
My machine is leaving wet clothes. I replaced the thrust bearings but the transmission shaft turns with the pulley wheel adjustment as if it is too tight. I had to pry the shaft down to attach the c-clamp, drawing everything too tight. What am I doing wrong?
For model number MAV8000AWW
Hello James,
Thanks for your question. We have a video for replacing the transmission bearings and parts with the part number PS2003651 at the following link:
https://www.youtube.com/watch?v=JE3K3mqlqss
I hope this helps.
My agitator just goes around clock wise. No agiataion happens. Do the cogs need to replaced or what part should i order. Thanks doug
For model number MAV6000AWW
Hi Doug, thank you for your question. That part is one of the more likely parts that will cause that issue. There are little teeth on the cogs that wear down over time. You would have to replace your agitator to replace those parts. Another set of parts that you would check for wear and tear would be your transmission pulley and bearing kit. I hope that helps. Good luck with your repair.
My clothes after wash still wet i already change the drive belt and thurst bearing , it seems the agitator is not move back and forth , can you help please
For model number Mav4500aww
Hi Hao, thank you for your question. There are a few parts that you could check. It is suggested that you check your transmission pulley and bearing kit. You may also want to take a look at your drain pump and make sure that it is actually draining properly. If those parts are fine then you may have to start looking at your motor, and the transmission. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Kari
May 14, 2019
Top part of agitator on my Maytag washer comes up during wash is this the part i need?? or do i need to replace the whole agitator? we think we have it pushed back down but then when i do a load, it comes back up.
For model number SAV2555AWN
Hello Kari, thank you for inquiring. This Agitator Assembly is the top part of the agitator for your model. It sounds like you may need the Screw part PS11741598 that holds the bottom of it in. We hope this helps.
Was this helpful?
Thank you for voting!
Barry
June 10, 2019
I watched your video on how to take apart and re-assemble that was pretty cut and dry. I didn't find any broken parts but the splines inside the agitator were bad on one side. After cleaning everything i re- assembled and it continue to do as before an not agitate. So i need to order a new agitator unit. Is there anything else i should check to see if it needs replaced for the washer to work properly ie agitator, i know the belt is good because i had to put it on spin to drain water and it worked fine.
For model number SAV2655AWW
Hello Barry, thank you for inquiring. You may want to consider the Idler Pulley Wheel part PS11742250, the Idler Pulley Springs part PS11742257, and the Spin Pulley for Transmission Drive part PS2040950. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
